Hinged loops are an elegant and spectacular element of clothing, thanks to which even the simplest product looks particularly feminine and gently.
Mounted loops are used for destination and as decor at the same time. Or only as a decorative trim of dresses or blouses.
They are performed from a special finished decorative cord, for example, a fusion or finishing braid. And also from a tissue strip with a cord inside or without it.
As a rule, it is cut from the fabric oblique beyk and sew a flat braid, or a hand. And then form mounted loops from them.
Such loops are ideal for the buttons on the leg, as they freely fit under the button, without creating an additional amount due to their thickness.
✂ The oblique beyk for air loops folded along in half the face side inside.
✂ At a distance of 3 mm from the bend, lay a line.
✂ SPU allowance cut close to the line.
✂ Ends of the threads of a line to go to the eye needles for the rod and tightly tie.
✂ To turn the needle to stretch the eye forward through the hand.
You can also use a special needle for turning.
✂ Released RULL roof and cut into 8 equal parts.
✂ From the cut segments to form air loops.
✂ Loops Notify to the average cut of the right side transmitted between the neckline of the neck and the type of cut, the ends of the loops are combined with the edge of the allowance.
✂ Length loops depends on the size of the buttons.
In the same way, you can perform mounted loops in any other model, even if the pattern is only one loop.