Want something new in the interior? To do this, it is not necessary to change the furniture and the surrounding items - you can give them a new fresh look! Like a magic stick to the magic wand, a piece of cardboard, chipboard, fiberboard, wood and even plastic will turn into something completely new, it is worth only to change their texture and color. Make it is not at all difficult and will require you the simplest materials. Below are as many as six options.
Option 1. "Marble"
Narvit the pieces of the page from the magazine (the paper should be glossy). Namazava only on one side with a piece of paper scraps, stir them on the decoded surface, alternating different colors. Let dry.
Water with acetone with a cotton disk and take care of the surface. Typographic paint breaks up, and you will get the effect of marble.
Treat edges, removing extra paper. Surface open lacquer.
Option 2. "Old Book"
For this method, pages from a book or newspaper will be required. If you want to get the effect of a compilation - Narvit the material into small pieces, put in some dishes and pour coffee. When the paper is impregnated, cutting out and let them dry.
Apply adhesive for decoupage or wood on the surface. Fully glue the surface of the paper. The cover of the paper, loss, losing them with glue also over the surface.
After complete drying, carefully treat the edges and open the surface with varnish.
Option 3. "Thin leather"
This option will require the used coffee filter. Narvit him into small pieces.
Loose the surface with glue to decoupage or for wood. Out the pieces of paper with a small launch of each other and also completely cover with glue. It turns out the surface, similar to unevenly painted skin.
After complete drying, you need to carefully fir the edges and open the paper surface with varnish.
Option 4. "Krakle"
An ordinary paint tape has noise to pieces and flashes cover to the surface. It is advisable to pre-tear off the piece of scotch smooth factory edge - so the final result will be more spectacular.
Dry the brush into acrylic paint (for example, the color of Umbra). Having removed the surplus paint so that the brush was almost dry, walk it on the surface. Paint emphasizes irregularities, roughness and joints, creating the effect of cracks.
In conclusion, fill the edge and open the surface with varnish.
Option 5. "Rucker"
At a richly covered glue for a tree surface, pour the finely accounted egg shell. Let dry.
Sponge or brush apply a couple of layers of light acrylic paint.
After drying, open lacquer.
Option 6. "Cracks in the tree"
To obtain such an effect, the surface should be uniform light, better white, color. Dry a slice of a sponge for washing the dishes with a rigid side into the dark acrylic paint and a smooth movement, as if drawing a strip, slightly swipe on the surface.
At the beginning and at the end of the movement, the sponge press a little stronger.
Details, as well as more options for decorating surfaces - in the video below.