Manege is made of plastic pipes.
It is understandable to buy it easier, more beautiful and perhaps more correctly, but the playlines of the desired size cost from 15,000 rubles, despite the fact that children are very often used by the playpen for their wakefulness, and often the playlies are simply awake. Searching for shopping, Fracking Avito, I could not find the size you need or more or small. Those more than anything else, it is possible to cut, the price of 16,000 somehow does not really have. Yes, and it is metallic, you can then do not cut down ... In nete, I found a good solution, a playpen from plastic pipes. Made from 25 diameter, for money 3000 material, in time 2 hours of work. Hygienic and practical. If you need to disassemble, stupidly cut and spied again))) I wanted to do on cleans, through the nuts, but it did not want to bother. Sizes 150cm at 115 cm Height 65cm. Distance between vertical 10 cm. If there is no son there play, but not so sorry to cut and send to the garage. And if it is, I think it is still from what it is done. Plastic, by the way, fully meets sanitary hygienic requirements for GOST, so that health does not affect health. Savings 13000 is not bad, scales on them diapers and other children's expenditure.
1. Jumpers of vertical pipe holders 10 cm only 68 pieces + 4 to 5cm for corners
2. Tees in width (8 from one 8 from the other bottom) + (8 from one 8 to another top)
3. Tees in length (11 from one 11 on the other bottom) + (11 from one 11 to another top)
4. Corners 8 pcs
5. Vertical jumpers 38 pieces of 60 cm
Total you need:
- Tees 76 pcs.
- Corners 8 pcs.
- Pipe for 2 m - 15 pipes (in principle according to calculations, I took 19, one whole and trimming remained, I think 18 is enough)
At first, I did the lower part, then the vertical parts put, the tees put on them, then fastened with jumpers. I think everything. Who wants to repeat the plan with the calculations is ready.
