- Beads Czech №10 / 0: white, black matte, brown grated, beige glossy, pink, pink pearl
- Wire Copper 0.3mm Silver Color
- Thick wire for stems
- Mononite
- Glue moment Second
- Acrylic green yarn
- Capron covers for cans
- Flower mesh tape
- Pink satin ribbon
- Bead Needle
A bouquet consists of 13 colors: 4 pink and 9 white. For the manufacture of a white flower, 4 different bead colors are used: white, beige glossy, brown grated and black matte (Fig. 1); For pink flower - pink, pink matte and black grated (Fig.2).
Consider in detail the manufacture of 1 white flower.
1. Petals.
Gerbera petals weave in French technician (arcs). To do this, we take 2 pieces of wire for 20-25 cm and twist them with each other. One end of the wire (axis) is gaining 10 white beads, on the second (working) end - 11 white beads, then twist the wire (Fig. 3). Next, we type 13 biserin wire at the working end and again twist 2 wires (Fig. 4). For the fourth arc, we recruit 16 biserin (Fig. 5), for the fifth arc - 17 beerin (Fig. 6). At both ends, the petal is becoming pointed.
The remaining end of the axial wire remaining over the middle row (Fig. 7.) and twist with the rest of the wire (Fig. 8). Petal ready. All needed 24 such petals (Fig. 9).
2. Middle of the flower.
As a base for a flower, we use a conventional kapron lid (Fig. 10). Holes in the lid can be made of hot seer or carnation. Required number of holes: 2 circles of 12 holes located in a checker order; In the middle in a circle, we make an arbitrary number of holes (Fig. 11) .. the more holes in the middle, the more dense and thick middle it will turn out.
We start to embroider the middle of the flower using a beaded needle and mononize. The gerbera center is embroidered with a black grated beads, laying the beads in a circle tightly to each other (Fig.12). Next, we remove the monofilament on the front side, we recruit 3 black and 1 brown beverage, stretch to monomize through 3 black beads and through the same hole in the lid we take the needle on the back side. Thus, we make 1 row in a circle (Fig. 13).
The next row of the core of the flower "build up" to the previous one. We skip the needle through two twisters of the black color of the previous row (through them the needle goes on the front side), we recruit two beads of brown and seven beige on the needle, on the wrong side we bring the needle through the same cover of the cover next to the black beads (Fig.14 ). It remains to make the last row: we pass the needle into the hole on the grid on the front side, we recruit four brown beads and six beige, we skip the needle through the first three brown beads and return the needle to the wrong side through the same hole. Thus, we make a series in a circle (Fig.15). Middle ready.
3. Build a flower.
For the rigidity of the base and to protect the monofilament on the wrong side of the flower, we glue the circle of gum or cardboard of black. Black color is needed so that the middle of the flower is not transformed. Next, we insert the petals into the first row of holes, with the wrong side of the petals twist in pairs (Fig.16). We get the first row of petals (Fig. 17). Similarly, fix the second row of petals (Fig.18).
4. Leg.
For the legs, we use a thick wire, closing the ends of the lobes wire around it. For fastening enough wires from three petals (Fig.19), the remaining ends of the wire tightly twist and briefly cut. Next, the wire is winding with green yarn (Fig. 21), in order to move the thread smoothly, you can pre-wind the wire with a painting tape (Fig.20). To fix the threads, we use the glue moment: sufficiently several droplets in arbitrary places legs. Instead of painting tape and threads, you can use Flor-tape, but it is found quite rare in stores, and, in my opinion, it turns out even more.
Our gerbera flower is ready (Fig.22). Similarly, we make the remaining 12 colors.
5. Build a bouquet.
Flowers in a bouquet place in the following order: in the center 1 pink, then in a circle we alternate 3 pink and 3 white, then 6 white in a circle. In order for the flowers to be "cap", you need to bend the legs (Fig.23). After that, the legs of the colors glue with each other.
The lower side of the bouquet is closed with a mesh ribbon for flowers (you can buy in a flower store on a footage) (Fig.24). We make loops from this tape (Fig. 25), we have them in a circle (Fig.26). Flowers legs wind the satin pink ribbon under the color of pink gerberas. I left the long ends of the pink tape.
Bouquet ready! A wedding bouquet of beads will continue after the wedding and will remind a long time to remind this happy beautiful day!
