Hello dear members of the forum! I want to share with you my craft.
I got on the occasion of the mirror. A little reflection, I decided to make a mirror into the hallway. And that's what I did.
Materials are as follows: furniture shield 1600x300x28, dry board 20x140x2000, plywood sheet 6 mm and 10 mm, extension mechanism, installation fittings and fasteners to the wall.
The jigsaw saw the window in the form of a mirror.
Rounded edge rounded ...
And made the end deepening under the mirror.
The milling fastening of halves.
I placed the future opening table ...
By making a recess for the handle in it.
From the back, made the groove for the walls of the drawer table.
The glued boards strengthened with mortise inserts in the form of a butterfly of 10 mm plywood.
Polished the surface of the side flaps.
Sklexed a box for a mirror ...
And polished all the external surfaces.
The jacket of the junction drank the hole under the protrusion shelf.
Made the shelf of 10 and 6 mm plywood.
I installed on the wall using metal corners from above and below.
The mirror is ready in the hallway, the only negative did not proceed the wood - winter.
Video: http: // http: //youtu.be/f5dsamht9em