Materials:
• 20 cm of silver wire with a diameter of 0.6 mm;
• 6 grated amethyst beads with a diameter of 8 mm;
• 1 silver bead with a diameter of 4 mm;
• 1 transparent bead with a diameter of 4-5 mm;
• ribbon of pink organza 1 cm wide;
• glue (on your choice).
Instruments:
• Rounds, pliers, cliffs;
• Bokoreya;
• Hammer and anvil.
How to make a cross from beads.
Step 1. You will need a piece of silver wire with a diameter of 0.8 mm with a length of 23 cm. Measure 10 cm from the end of the wire and overtake the wire around the round row so that the piece of wire accepted U-shaped. Squeeze the wire with pliers or cliffs under the fold so that the looping is formed at the end of the segment.
Step 2. Gently spare and strengthen the loop with a hammer. Two parallel directed wires can shift, they need to be returned to the place.
Step 3. Take three amethyst beads on the shifted parallel directional ends of the wire, promote beads up to the loop. With the help of pliers, bend each of the spiped ends of the wire at a right angle in opposite directions, as shown in the photo.
Step 4. From each bend, measure 1 cm and with the help of the tips of the pliers bent the wire in the opposite direction. So you will have a cross crocker. Pliers are squeeze the bent ends of the wire so that there are no gaps between parallel to the warmer.
Step 5. Slide on each side of the crossbar of the cross on one amethyst bead.
Step 6. Enter beads to the center of the Cross. With the help of the rounds, make a loop, bend it towards the beads so that the beads and wire come into contact. Squeeze the pliers, make a nodule from them to protect beads from slipping.
Step 7. Bend the wiring ends at right angles next to the holes in the beads. Slide the latest amethyst bead on vertically directed spotted slices of wire. Now the shape of the cross is finally formed.
Step 8. Wrap the shortest end of the wire around the longer, next to the hole in the bead, and secure. To give the product a more accurate look, cut off or tightly press the pliers all unnecessary.
Step 9. Slide the silver bead with a diameter of 4 mm on a longer piece of wire, around which the shortest one was turned. With the help of the round, form a loop. Fasten the wire by taking it around the base several times, then cut off everything too much.
Step 10. For greater sophistication of the product, make a "droplet" from a transparent bead with a diameter of 4-5 mm and a small spiral of a wire attached to the base of the cross.
Step 11. Make 2 spirals from the wire with a length of about 1 cm. Cut the wire from the maid, leaving about 2.5 cm direct wire. Obtain a straight wire around the tips of the round row. Continue to curl wire until you touch the spiral.
Step 12. Cut a little tape and thread it through the spiral. Pliers squeeze the spiral to fix the ribbon in place. You can drop a little glue so that the tape keeps stronger.
Step 13. Grind the tape through the ear in the head of the cross and attach the second spiral as well as in step 12. Make a clasp your choice and attach it to the hinges at the ends of the spirals.
Source material - http://rukodelie-rukami.ru/bizhuteriya/42-krest-iz-bisera.html