Master class from Tomas Olga. Painting and painting of furniture acrylic pearl paint.
After publishing photos with painting and decoration of the walls of the USSR, there were many questions that concerned the technological process, painting and painting furniture. For example, here is one of them: "I also recently repainted and modestly signed a bedroom :) I have such a question after a question - what painted in silver, what is it so smooth and glitters? I could not get. I'm thinking about buying paint in the canister. "
Therefore, I decided to create this post with a detailed description of the process and technology.
1) Putty for wood Close all small chips, cracks and other small damage to the surface of the furniture.
2) We carry out the necessary repair and replacement of the mechanisms used on the furniture.
3) After drying the putty with the help of shallow emery paper, we vaulting the entire surface of the furniture. The sandpaper must be small to leave the scratches on the surface, since the soil and painting may not close them. This item is performed both for matte and for a glossy surface, while all the varnish should not be removed, you just need to create a rough surface for a good grip and paint with the surface of the furniture.
4) Degrease the entire surface of the furniture with alcohol, vodka or detergent.
5) Using a roller we apply acrylic soil to the entire surface of the furniture.
6) when applying acrylic pearl paint (silver, gold, bronze, copper) roller or use paint from the can, the surface of the furniture is glittered only at a certain angle and lighting, these paints look great on small and relief surfaces and are very losing their views on large and Smooth planes. Therefore, to maximize the properties of acrylic pearl paints, I use such a reception: the paint is applied to the surface of the furniture small (not wider than 2 cm) with a flat tassel, short strokes that are applied by different angle. This closes the entire surface of the furniture in a 2 -4 layer as needed. Painting is obtained by a smooth layer, and with a special gentle texture, which makes it possible to see the pearl gloss from any point of observation.
7) After the furniture can dry out the painting (ordinary or screen), or can be separated by decoupage.
8) Painting is necessarily fixed by 2 layers of yacht varnish, which is applied by velor roller. It is necessary to ensure that bubbles are not formed. After the first layer of varnish, you can stroke the smallest sandpaper, and then apply the final layer of varnish. Acrylic lacquer Check for stability, especially on the working surfaces does not pass (even parquet), the yacht varnish is resistant to abrasion, to water, and relatively quickly dries (4 - 6 hours).
one.
2.
3.
Posted using the application I - photographer