Garden hose is an extremely useful thing in the country house and is very vulnerable to external stimuli. Incorrect operation and the more incorrect storage can cause the emergency damage to the garden hose. The best thing to be done to extend the service life is to deal with a special holder. However, it is not at all necessary to purchase it on the market, you can make it yourself from the girlfriend.
Fashion first
To create a full-fledged hose coil made of primary materials, you will need a plastic bucket of paint, a sheet of thick plywood, glue, screws, a set of tools including an electrolovka for cutting. The production process consists of two stages: the creation of the coil and the holder assembly for the garden hose.
First of all, it is necessary to remove the measure and make the markup of plywood, exhausting all future details. The coil will consist of two plywood circles and a cylinder to which the hose will be filled. All this is connected by screws and glue. In the plastic bucket with one of the sides, it is necessary to make a rectangular slot for tightening the hose.
The coil will absolutely not be superfluous to put a round knob (for ease of rotation). It is necessary to do the hole through which the slog will be pulled out from the coil.
Method of the second
The second method is much easier to first, however, the holder will turn out much more primitive. All that will need to work (besides tools) are two hefty bolts, a wheel drive from the car and the hose directly. For a hose 20 meters long, a wheel drive is required 13. All you need to do is put a wheel on the wall (post, fence) exactly as it is attached by car.
Pre-wheel should be cleaned and painted. Of course, such a holder will not rotate, however, as an option in the framework of the "cheap and angry" is quite good. Anyway, this storage method is much better than when the hose for watering is lying where it fell.