How to make an air snake with your own hands: Step by step instructions

Air snakes - entertaining entertainment for the whole family that really bulks.

From year to year, find a really high-quality snake is much more complicated than many think. In stores there are more and more low-quality models. Hence the withdrawal one: you need to do it with your own hands. Fortunately, make a snake with their own hands very simple.

You will need:

• 2 slats;
• plastic bag;
• glue;
• fishing line;
• Scotch.

Instruction:

1. Fold the Rake Cross.
2. Secure them, tied a piece of rope.
3. Then cut cut and decompose it smoothly on the surface.
4. Top covers a cross from the RECEK.
5. Your package must completely close all sides.
6. Measure the required number of web and carefully do more superfluous.
7. You have to get a rhombus.
8. Tighten the tight packet on the rail.
9. Turn the edges and carefully susht.
10. Then tie the line.
11. One part should be outside to the area of ​​crossing two plates, the second - from the bottom, to the corner of the "body" of the snake.
12. The ends of the tied fishing line are gossip into the node.
13. Next to it, attach a long fishing line with a small coil.
14. Your bridle is ready.
15. At the bottom, attach the color polyethylene pack. This will be the tail of the snake.
16. Your snake is ready.