Rings with large stones are always spectacular. In this master class, we offer you to make the original ring from silver plated wire with a large stone. The main thing in it is to pick up the stone itself: in size, he must harmoniously look at your hand, in form - to be flat with one of the sides and with uniform edges thick. In this case, it will be reliably fixed in the rim offered by us, and it will be tightly lay down to the finger.
Materials
To work, you will need to cook:
- Copper wire with silver coating, 0.35 and 0.6 mm;
- nippers;
- pliers;
- round-rolls;
- Ostrogubers;
- big stone;
- Rigel.
Be careful, the photo does not always correspond to the description, since during the process I had to redo the rim, for better fixation of the stone. Making a ring, follow the process description of the process.
Step 1 . First, we offer you, as in this master class, make a sketch of how the rating of a genuine value will look like. This will help not only look at the selected type of rim, but also to imagine how many wires you need.
Step 2. . From the macs of a large wire, bite four pieces, the length of equal circumference of your finger + the length of the rim + allowance (3 - 4 cm).
Step 3. . Put all pieces of wire parallel to each other. Take a thin wire and, retreating 3 - 4 cm from the edge of the harvested base parts, start wrapping it around them. Please note, first two turns capture the upper two wires, and then two more turns go to the bottom pair. Weaving continue until you get a billet, which is enough for the main part of the ring, and on the stone braid.
Step 4. . Attach the billet to the rigle, at the point you need and wrap around it around it, giving it the desired shape.
Step 5. . Cry shape give and rim for the ring.
Step 6. Place a stone in rim. It is so that the edges of the stone clearly lay between couples of the wire. Locking the root-based wires fix the ring, but until you tighten them strongly.
Step 7. . Gently try on the ring on the finger. Try not to scratch the skin's seams. They are
sharp.
Step 8. . If the ring approached the size and the stone is securely fixed in the frame, tighten the wire along the edges, turning it around the base. The ends of the wire fuel inward and gently cut. If necessary, you can take them carefully to sand so that the edges are not so sharp.
