Introducing the master class from the master @ Ntonin @ to create a very gentle comedom, for the manufacture of which the remains of drywall were used. Wonderful idea! Thanks to the author for inspiration for creativity!
So, we look at the master class on the use of drywall residues and the creation of a jewelry comedwork. I want to notice if you use moisture-resistant drywall, it is usually green and used to finish bathrooms, then the comedicle can be used for toiletries and quietly place it in the bathroom.
Materials that we need:
- Plasterboard 6 mm
- stationery knife
- Pencil
- ruler
- Super glue
- Pluckle
- sandpaper
... and a huge desire to make something like something !!!)))
With plasterboard, it's a pleasure to work - it is much easier than it seems. So dare!
Blacksmithing the bottom and shelf. Girls do not indicate the size, because I did under the size of my shelf, and they can be different. Making cuts with a knife. The incision must be made with a pressure of such a force that would cut the top layer of cardboard and cut the plaster slightly.
Lomese
on the collar cut the knife
On the finished day and shelf, blacksmith places where partitions will be
We put the bottom, put the boxes on it (I have it boxes from cotton sticks) on top of put the shelf put the rear wall and sidewalls. On the sidewinks we make measurements of width and height
With the help of a ruler and leaps, draw a pencil outlines of our sidewalls
We cut, break, cut out ...
Location the front wall. Lower part is future drawers of the boxes. Cut out ...
Apply
Cut the partition and equal to the knife in this way.
We put partitions and apply the front wall. We make in her dashes, where partitions are located
Cut the partition between the boxes
Apply glue. It's easier to do this hot pistol, but because I have no ... I had to use the old-fashioned)))
After 15-20 minutes we apply glue to dividers and ...
... put the upper shelf with "weighing"
And so we will deal with the front wall. On a plate, draw a semicircle
IMPORTANT!!! From the opposite side, it is necessary to do an identical action, otherwise the GC will break no where it is necessary ...
Next, make side excavations. They are slightly less than the size, because the central boxes are greater than the side.
For a greater combination, we make the same silhouette on the back wall. We take the carved front wall, we apply it to the rear and supply a pencil.
Align the partitions in order to be well glued to the rear wall
We apply glue - we apply the details, put the oppression from above
Make more dividers for the upper shelf
We apply glue to the joints where we will stick the front wall
Cut the bar for boxes and all whirlpool
Glue planks to our future drawers.
Next, put sand. It is comfortable for me with my hands ... All irregularities and joints are felt))
After 12 hours you can grind
Collected!
The last stage is soil.
Source: Stranamasterov.ru/node/532568.