Each household house stores its decorations in the box. Tree caskets made different. I decide the casket oval. Such work is only one and it stands at my brother now. As I did and that for this you need to learn to read the article to the end.
Look at my work and the description of the manufacture. And so we begin to consider the manufacturing process. The box is made of birch, use only well dried wood. If you do not make the product, if you are not sure that the tree is dry. For some crafts, the increased humidity of the tree is permissible, there is no for the box.
Casket carved oval shape
The first thing on the fugoval machine was processed by the desired boards, selected in advance without bitch and defects. How to work and configure the machine Read the artwork on the woodworking machine fugoval.
Blanks Casket
- 250 x 140 x 15 mm - 2 pcs
- 250 x 90 x 40 mm -2 pcs
- 60 x 90 x 40 mm - 2 pcs
- 40 x 40 x 8 mm -4 pcs
Next step, you need to glue box box. Cover, bottom and legs we glue later. For gluing, use proven glue. I am before gluing the products, make a tricted tree gluing and smash. Boards should not burst on a glued seam. Now I use PVA professional glue.
Bonded the box for the box in the vice of carpentry, through the pads to not damage the box. We look at an angle of 90 degrees inside. The rectangle box should be smooth, without distortion.
Further did two templates internal and outdoor oval. The first thing was drawn on paper, and then transferred through a 3mmm pylon through a copy of 3 mm and drank the jigsaw. How to work the jigsaw, I wrote in the article Standing from plywood with your own hands. The inner oval should be less than 20 mm in length and 20 mm in width, as the wall of the casket is 10 mm.
Then you need to cut in an oval. According to the template, it is black with one, and then on the other hand, to be visible when drinking like a saw. I drank a simple arctic saw, in those days there was not still jigsaws. When drinking, we leave the line, the saws gently slowly next to the line. Grinding inside on the vertical drum, my homemade machine was made. It should be a smooth oval.
Open Casket
We continue to do and glue the lid and bottom with a box in vice, do not forget to put gaskets under the cover and bottom. On the glued billet, there is an external oval on the lid and the bottom. Drink and grind the outdoor side of the box. Before grinding, you need to glue legs.
Separate the lid on the milling machine, the cutting of the cover is plusing 10 mm, as can be seen in the photo. Spit on the plane, the cover and the workpiece of the box itself so that there is no gap between the lid and the base. If I dug perfect, then this is not necessary. Just slightly pass the shallow side of the edge.
We need to make a casket from the tree beautiful and for this on the lid made a bevel. Did it on the grinding machine. Translated by the inner template oval on the cover and neatly rotating the cover in a circle gradually made the SCOS.
I put one extended loop, did myself. You can put two small together. Now they are sold different, before it was not necessary to do it yourself. So we approached the decoration of the box with a carvings.
Carving on the box
A geometric thread was used across the entire casket. Drew the thread immediately on the box and cut out. Supplements lied over the drawing inflicted. Himself painted and transferred through a copy to the box. On the edge of the base of the box and the lid, too, with the help of burning, the spiral pattern caused.
Lacquered a casket three times. The first layer was nitrolated, and the two next oils. After the first layer of the shallow skin to go through the entire box and remove the romal of the tree. Do not rush to cover once at once, each layer must dry well.
The latter needs to be placed inside the casket. I did from Plush, the velvet looks good. The glue only caused on the walls and bottom of the box. The first thing carved and punishable the wall, and then the oval was cut into the bottom.
Source: http://drevpodelki.ru/