Production of any product from wood requires certain skills. Newbies start with simple crafts from wood and gradually increase their skills. Carved wooden brushes I did different. This one of the latest developments and reading to the end the article you will learn how to do it.
Preparatory work
Template Making - Figure Form
Making template - shape of bristles
Making a screed
Production of pads
Describe in detail how the drawing of the parrot I will not. It all depends on the fantasy. It was paid to that the product from the tree had a beautiful and comfortable shape. The brush is used for their intended purpose, it does not lie like a souvenir.Making a template for the drawing went parallel. The drawing should fit in a convenient form for me. The template made from 3 mm plywood. I label sawing I have mastered a long time ago and cut off the plywood that I need it is not difficult.Next, it was necessary to make another template of 3 mm of metal sheet, for applying holes when drumping the pad. The grinder cut the size of 340 x 100 mm. Processed the edges on the sandpaper and before driving the holes with a 2.5 mm drill, made a core notch. You need to make one hundred twenty nine holes. Even in every corner, drill a thin drill under the carnations to nurture to the made block. For example, it is necessary at the end of the emery paper and remove all the burrs.Screed is designed for gluing two parts of a wooden brush. It is made of pine and finishing, 170 x 50 x 450 mm came out - 2 pcs. You need to drill six holes under the bolts of 10 mm. On the template stated and drilled the window under the bristle. With this design, I tightened the bolted product when gluing.
For the manufacture of the pad, I sharpened under the cone drill 2.3 mm. The block for the brush made from birch. Finishing size 340 x 100 x 8 mm. Then the cooked pattern of metal, we assign and nail with cloves. On the machine or drill with focus drill.The drill must be 1 mm from the reverse side. This wooden brush is cut out especially, it makes a relief wood carving. The top pad is made of birch and size of 340 x 100 x 20 mm.
Making brushes
Before you started making, I disassembled the brush purchased in the store and looked as she was stitched. The process resembles how the boots or shoes are laid. We drag the loop, and for the place of the caprochy thread we skip the small bundle of the bristles and tighten it into the hole. Everything is not so hard, just need to try and understand.The bristle took from the purchase of a large brush, length of 80 mm. The more accurate to flash the more convenient will be equal. For gluing the upper lining under the thread and the bottom, used the glue professional - carpentry. Exactly missing well two parts of a wooden brush, you need to clamp in the tailored. It is necessary to put a bristle to the top so that the glue does not hit the bottom block. After drying, the adhesive began to be further making.
According to the template made of plywood painted the shape and sawed by a manual jigsaw. Further translated through the photo picture and started thread. On this brush, a complex carving is made. Beginners need to learn to cut geometric threads. After cutting the parrot, I made a wood painting from a tree and covered twice with a varnish. After the first lacquer, do not forget to undergo shallow emery paper and knock down the raised pile.The front side of the pads must be laid before flashing the bristle. And the latter you need to take a bristle. Carved wooden brush will decorate your home. Work done with a soul as a gift close, this is a memory for many years.
