See the master class from Eugene Crow
For the manufacture of the necklace you will need:
- the basis for embroidery felt;
- genuine leather for insulating;
- a large cut of agate non-symmetric shape;
- pendants from hematite in the form of a drop;
- beads from the pearl rectangular shape;
- Rivoli crystals;
- small rhinestones on the chains;
- river pearls, slightly flattened form;
- glass imitation of pearls 3 mm and 4 mm;
- various glass beads of different shapes and sizes;
- Beads: Dark Silver No. 11 and Light Silver No. 15; silver metallic number 10;
- hugs for beads;
- Clasp hook;
- Transparent monofilament for embroidery and nylon thread for assembly.
1. On fiet, we draw a pattern for the necklace, in the center of glue the cut of agate (literally on the leap droplet, the main thing is that the stone does not eat during the embroidery), then we are wearing agate in a circle using a dark silver chopped beads.
2. Agat in a circle wept 3 rows of mosaic. Then weave the 4th-7th mosaic rows only under the bottom of the stone (from the left convexity to the right), removing in each row of 1st bisper from each edge.
3. Then weave the 4th-9th mosaic rows over the upper part of the agate and the 4th-7th mosaic rows around the small convexity on the left side of the agate (weeping the rows, as cleaning the 1st bisper from each edge).
4. Sein river pearls. Send a pearl beads and we are cut around with chopped beads.
5. Web 2 rows of mosaic.
6. 3Y mosaic row weaving from light silver chopped bead No. 15. By the inner edge of the necklace, we have 8 braided pearlescent beads.
7. Draw the contour for pendants from hematite, we sew a row of dark silver cutting over the contour, weave from a series of circuit 1 row mosaic and then put the suspension inside.
8. The suspension is visually divided by half along, the left and right side by the departing separately from each other. On each side, we are wearing 4 mosaic rows from cutting No. 11 and the 5th row of a row from light-silver cutting No. 15, removing 2 extreme bispers in each row.
9. Hole in the suspension we disguise a glass pearl bead 4 mm. We bring the thread in the extreme sv. Silver beads of the 5th row of braids, we ride several sv. Silver beery and pass the needle through St. Silver beery near the pearl beads, having beaded low diagonally. Then it is similar to stretch the 2nd bead low, laying it on top of the 1st.
10. Send river and glass pearls, sew beaded rows, next to the suspension, sew rhinestones on the chains and draw the contour for the rivoli crystal.
11. Pulling Crystal Rivoli
12. The empty space between agate and rivoli fill with river and glass pearls, glass beads of different shapes and sizes, as well as beads. Excess felt gently cut as close to the beer as close as possible.
13. The necklace decorate the skin, the edge is sewn by the Russian method, using silver metallic number 10, under the agate edge they sew Russian method using various beads and river pearls.
14. To a row of the trim, the Baptim is low with beads using a solid nylon thread for this.
To the edges, the necklace is fastened with a hook clasp.
