- First you need to cut out of pink, red and white paper circle. In this case, it is not necessary to do the perfectly smooth surface. On the circle it is necessary to draw a spiral, after which the circle is cut down the spirals. The result will be paper tape.
- The resulting tape must be collapsed. Do it need from the external end. When forming buds, it is better not to rush. So that the rose does not crumble, you can use glue.
- A ready-made rose in the middle must be pierced and put on a twist. In order for the aircraft to look more elegantly, it is necessary to wrap the branches in advance with green paper.
As a result, at home, literally in a few minutes you can make a beautiful bouquet of roses.
Realistic rose corrugated paper In order to implement this idea, it is necessary to stockpite with paper, adhesive tape, glue, scissors, wire. To ensure good fastening of petals, it is advisable to find a green tape tape, which is a strip with adhesive ability. This subject is often used to create paper compositions.
- First you need to cut fourteen and seventeen cord petals. After that, you need to cut four or six small petals in the form of a drop. It is necessary to ensure that the scissors move in the direction of paper stripes, and not against them.
- After that, the thick wire must be wrapped using teep-tape. If such a tape was not found, then from corrugated paper, you can cut a thin strip of thirteen millimeters with a slightly width of it with glue.
- Each petal needs to be neatly stretched, and you need to move from the middle to the edges. The edges should be cut using a pencil or toothpicks. As a result, two species leaves should be.
- Now you can proceed to the formation of the flower. You need to start with the attachment of petals that have a drop shape. With the help of teep-tape, each petal should be attached to the stalk. Then you can proceed to larger petals that have a heart shape. Lastly, a cup of foundation is attached around the base.
- On separate parts of the wire you need to attach flower leaves. After that, from the base of the sheet, it is necessary to wind up the entire piece of the wire tape-ribbon green to achieve similarity with the stem.
- Stems with leaves need to be attached to the main stalk with a bud. To achieve even greater realism, the stalks with leaves can be slightly bend.
Beautiful rose from napkin To make a beautiful rose for a limited time, you can use the most ordinary napkin. This technology is very simple, it does not even require the use of glue. To get a beautiful decorative rose, you need to perform such a sequence of actions:
- The napkin needs to be deployed and kept. After that, in a straight line, you need to bend a few centimeters from above.
- Left top corner should be held between the index and middle finger.
- The upper right corner must be right hand. After that, it is necessary to wrap the napkin around the two fingers of the left hand, and the right hand you need to make movements from ourselves. If you look at the top, then the movements should be made counterclockwise. At the same time, the bent edge should be from the outside.
- You need to finish this process when it turns out the tube. After that, the corner at the external edge must be beatened in such a way as to get a triangle - this is exactly what will be the extreme petal.
- Right hand need to hold the napkin under the index and middle fingers - about the fourth part of the length. Above this place should be the rose from the napkin, and below the stalk with a sheet.
- At the point of compression it is necessary to twist the napkin to get the stem. In the middle of twisting, you must pull out a free end - you will need to make a piece of paper, after which you can continue twisting.
Make a beautiful and realistic rose from paper is quite simple. To do this, you need to be patient and pick up all the necessary materials. The result is a very beautiful decorative subject that will decorate any home or will become an excellent gift to friends.
A source