Glasses, washed with sea water, look very interesting. Finding a couple of people, you can save them, making the suspension. This pendant from sea glasses is simply made by hand, since the glass itself does not have to drill, it will remain integer. Even children can construct such a pendant.
Prepare materials before starting work:
wire;
sea glasses;
pliers;
chain or lace;
olive oil;
Fabric or paper.
Step 1. Glass polishing to pendant look beautiful, it should be polished. To do this, on paper or fabric, drip a bit of olive oil and soda pendant so that all the salts and the fallow are left.
Step 2. Formation of loop marine glass so that it is kept on the chain or cord, it is necessary to wrap the wire. You need to start with the formation of the loop. In it, then it will be fastened for a chain or lace. After forming a loop, a wire direct under the tilt. Choose the angle that you enjoy.
Step 3. Winding glass next step will be wrapping the wire around the glass. To do this, the wire directed at an angle clamp the index finger of the right hand, the glass itself hold the index and thumbs. Start wrapping the wire around the glass. Make the same gaps to the turns.
Step 4. The final turn when the glass will not be left for the next turn, cut the wire, leaving about 1.5 cm. This piece of wire pliers wrap in the ring, press it to the base of the glass. As a result, from this side you should have a mini-target semblance.
Step 5. Alignment of turns pendant is almost ready. It is necessary to bring it in aesthetic appearance. For this, all the turns should be dissolved, leaving a relatively equal distance between them.
Step 6. Assembling Necklaces For the necklace assembly remains one detail - the ring from the wire. Cut off a small piece of wire, drive it slightly, connect with a ring on a pendant and with a chain. After that, round is finally.
Chain with a pendant is ready!
A source