Materials:
- Yellow and green threads
- PVA glue
- Wire
- scissors
Thick wire wound in the form of the letter P. thick wrapping yellow threads. In the middle, as it were, we flash needle, thereby covering the thread among themselves so as not to be crumbled.
Remove from the frame, the middle lubricate the glue and turn into a roll.
.
In the middle we wake the thread too lubricated with glue.
.
When the glue dries, cuts into 2 parts, so it turns out two flower.
Now we need to cut all the threads
.
Lay out green threads in a row and flash them like yellow before
.
Ward the yellow flower, well fix the thread
.
From below, if necessary, cut the thread, lubricate the glue and put them in the inside
.
Congratulations, your dandelion is ready!
A source