Tired of looking at the disgrace on the balcony, which turned into a real warehouse of the necessary and not very things! Yes, and spouse complained: "I want to organize a winter garden on the balcony. And there you can not even enter! " And finally, I decided!
So, what we have: the glazed narrow balcony (glazing was provided for the construction of the building), the boarded warmed floor (made the wizards who saw the apartment) and conducted for lighting wiring.
What you want to get: left and right - lockers for storage of things (symmetrical balcony), place for colors of the spouse, as well as beautiful walls and ceiling.
I put the trunk on my BMW (I had to go broke and buy - it would be useful!) And I went for the material in "Castorama". Walls and ceiling decided to separate PVC panels, lockers are made of wood at the place. It was purchased: 12 panels 10x250x2700 mm with trim under light oak for walls and 4 white panels of the same size on the ceiling. Under the PVC panel, it takes a doom, so they were purchased by rails with a cross section of 10x30 mm - about 30 pounds. m. For the foundations of the lockers, they took a cross section of 30x40 mm and the 40x40 mm bar - under the inner window sill. Yes, and two more white plastic windowsill: one - 200 mm wide and a length of 3000 mm (for installation under the outer and interior windows), another - 400 mm wide (for lockers). Celebrate expensive professional foam "Titan" (for ourselves! ) And the screws of different sizes: Ø3x20 mm, Ø3x30 mm, Ø4x40 mm, Ø4x55 mm (conveniently - in "Castorama" Self-tapping screws are sold both packed and for weight).
I started finishing the balcony with the gate of the gaps, which were abuse.
Having coped with this, started building the frame of future lockers.
Having tried to use the laser level, I realized that it would be necessary to return to the Dedovsky method (so it was all crookedly) - a plunder. The point of reference was the top - relatively horizontal - the edge of the parapet of the balcony, to which the window sill was supposed to lie down.
The locker must consist of a cabinet, covered with a window sill, which was simultaneously a shelf, and a narrow foam to the ceiling with shelves. Based on this, the base with the edge of the parapet was made for the cabinet and foam.
What instruments will need:
• Hammer drill
• Sharpening machine with diamond circle
• Sculpture
• Bits and rolled
• Manual Circular
• Angle device for screwdriver
• Ribbon Schlifmashinka
• Lobzik
Bruks were attached to the walls of self-drawing on dowels. Holes under the dowel drilled the Bosch drum drum (it would be better to take a blow to the guys!) Tirdo-alloy swells. Since the rolling had accounted for all the time to press, put homemade sharpening in the kitchen with a diamond circle. The self-tapping screw was wrapped by a Bosch screwdriver. Subsequently, it was purchased for him a set rolled with shanks-bits ¼ ", since it is constantly wrapped / turning the cartridge when you change the drill on the bit - inconvenient. Having completed the foundation of the lockers, engaged in the shap.
First, from two RESEKs made a corner that secured on the edge of the parapet. Then put up the vertically bars of the bedside tables, which were adjacent to the parapet, linings and made a shap on the parapet. Then he made a doom on the ceiling and the opposite wall.
He was prepared for the inner window sill. One face of a 40x40mm plander was a shut at an angle of about 15 °. After several adjustments, the lung bar in place so that the upper face became horizontal. This face was attached another line 40x40 mm. Then flush with the top bar in the gap between the window sewed another bar. There was a horizontal platform for the inner window sill, which I also truncated.
Next, we needed supports for the shelves. I did not find suitable bars. Therefore, I bought a cross section of 20x45 mm, turned the hand circular up the table, secured it on the workbench and dissolved the bars along. It was easy to attach the bars to the wall, but on the reverse side of the racks of the lockers - is problematic (it is very difficult to bring the screwdriver due to the configuration of the walls). Helped a wonderful angular device - and the supports under the shelf got up to the place.
It has time to paint. It was necessary to break everything in front of it, especially the floor, which for 8 years was pretty stained. Here it was useful to the ribbon grinder, which I have never used. As paint took the Belink azure, which is written, a stand for atmospheric influences and ultraviolet. The azure was made of two layers with intermediate drying for 6 hours.
Shelves I made a leaf of 8 mm birch plywood. Again, I was very pleased with the "Castorama" - it offers free saws of leafy materials! In my opening sheet of plywood 1520x1520 mm sawed in a matter of minutes.
Further, the electrolybiz went into business. The most difficult thing was to cut the shelves for bedside tables. In Penalykh, I entered easier - slept one shelf and used it as a pattern. The shelves sewed all the same wonderful corner devices to supporting rails.
It is time trim. Sew walls and ceiling PVC panels - one pleasure! I saw the panel in the size with a reverse tooth with a reverse tooth laminate and the furniture stapler on the spot. I had to tinker with the installation of the lamp on the ceiling, as it was difficult to accurately get into the rake of the root. Finally, the lamp is installed on the ceiling, the walls are trimmed - it's time to put the windowsill.
I started with wide window sills on the bedside tables. The windowsill profile had to repeat all the bends of the walls. Then engaged in drinking the windowsill under the outer window. The junctions of this window sill with window sills on the bedside tables were stabbed under 45 °. Then he made the windowsill under the inner window. The window sills planted on the glue "moment-installation."
It was necessary to take away the junction of the window sills with frames of external and internal windows. The suitable profile I did not find in stores, so I bought a profile intended for tiles. Cutting it, I got what is needed. Profile sled to silicone sealant. The junctions between the windowsill were also treated with a sealant.
Now it was necessary to sew all the joints between the ceiling panels and the walls with a profile layout and put the plinth. In order not to go to the cottage behind the stupid, built it from the primary materials: a pair of crashes of bars and a piece of furniture shield. Having putting all the joints with layout, glued to the inner window sill. The balcony is almost ready - things can already be folded. In conclusion, secured the roll curtains on the window.
It remains to put the doors on the bedside tables and the pencils, make slopes on the input loop, remake the lamp to the LED. Sucks - the case is hiring. But with the doors - the problem. I looked for something ready, but I did not find the lungs (frame) doors of the desired size. Spit balcony doors from chipboard or furniture shield - I do not want. I decided to buy money to buy a good tracing pendulum saw (already bought, but did not do the doors, the lamp was already redoned into the LED) and knit the framework on their own.
