First you need to pick the desired machine size. I had a chocolate slot of 7.5 per 1.5 cm. We apply chocolates to the cardboard and draw the car.
Cut 2 parts.
Now cut out 3 parts for the middle of the machine. It is better to measure in the go. Tip: Use a bend cardboard place. Dimensions are all in centimeters.
Now glue all the details of bilateral scotch, it is possible and ordinary, but so more convenient.
Cut the strip of pallroll pallboard. Measure the length of the machine and glue with a bending.
Now cut the part for the sidewall, measure the size.
We glue and do the same from the second side.
Memind and cut off the item from the gold corrugated cardboard for the front glass.
Cut the sidewalls and measure the car, cut into 4 windows.
Printe.
The same makes from the second side and behind.
We glue the bumper.
Gently glue chocolates.
Cut the circles from the cardboard with the mug.
For both sides you need 8 circles. The same makes the most from the gold corrugated cardboard, only the size of more for the pent
We glue the paper to the cardboard and glue two cardboard circles, the wheels are obtained.
Now you need to take the bottom. I first thought that I would not do that, so you can do it at the very beginning after the cloak of the car haybumaga. For this, we cut off the size of the cardboard and the harthobum, we glue everything to the bottom of the car too.
We glue the wheels of the machine.
From the front, I was sticking the headlights of candy giving and the printed car number and behind too.
The hole between the bottom and the car was glued with glue with glitters.
That's all the gift from sweets - a chocolate car ready.
A source