Probably, this is the easiest and most useful MK of Zadyshyy, which I ever removed. Gorgeous standing stands!
Prices for them range from 300 to 800 rubles for a stand for a mug and from 600 to 2000 rubles for a large round napkin. I had 250 rubles on the alert (if you wish, you can find cheaper: about 150 rubles for 10 meters) for fat jute and 80 rubles for thin. Enough on the 1st napkin and 4 coasters under the mugs.
We will need: ⠀⠀
- jute rope 8 mm, 10 meters (on 1 napkin with a diameter of 35 cm); ⠀⠀
- Jute rope 6 mm, 10 meters (on 4 coasters under a circle diameter 12 cm each or 1 napkin with a diameter of 32-33 cm); ⠀⠀⠀
- Acrylic paints and synthetic flat brush; ⠀⠀
- hot glue, scissors;
- 20-30 minutes of free time. ⠀⠀
Step 1
Watch the "snail" by gluing the side sides of the rope to each other with the help of hot glue. When the diameter reaches 4-5 cm, I recommend continuing to work on the surface. Thus, the napkin will be as flat as possible, smooth and neat. ⠀Step 2.
When you finish to bored the napkin, the burning edge gently stick the glue droplet. If the rope is thick, then just press it well, if thin, then flatten it when gluing. If you have a desire, you can make anti-slip patches from hot glue.
Step 3.
Stands can be written with acrylic paints. To do this, take a flat synthetic brush with a elastic pile and first make the contour the selected color. After coloring the middle driven by movements in the fiber. This will fill all the irregularities and evenly to cry, not leaving acrylic flashes. Give the paint only to dry 24-48 hours.