In order to make a photo holder, we will need:
- Crocodile clamps
- Pruning electric rods
- Paint for plaster
- Gypsum powder
- "Hot Glue" and "Pistol" for him
- Slice wire
- Aluminum jar or some form (for example, from under the candle)
- Floors and pliers
- Spoon, brush
Let's start working:
- Cut the electrically on the pieces of 10-15 cm long. For each such segment, the crocodile clamp and fasten, pressing the cervix with the pliers.
- Then twist them between themselves at a distance of approximately 5 cm from the lower ends, for strength to pre-engage them with wire. Slide free ends in opposite directions.
- All this is brought to the bottom of the form with the help of hot glue.
- Divide the gypsum powder in a blue, following the instructions. Fully fill the shape of the gypsum mass. Put the design to dry by about 10-12 hours.
- Cover the gypsum surface of the paint and let it dry. Now give the wire the right shape, and everything, you can enjoy your masterpiece! Photo holder is ready!
You got a wonderful and universal thing. You can place your favorite photos, postcards, the necessary paper to the photo holder. You can put this design closer to the phone to always keep the necessary rooms and business cards at hand.
A source