My kitten appeared, and the family wanted home for him. To, then, and play, and sleep, and pour (and not come at night)). Well, I thought, and why not make it myself. There are tools, the hands seem to grow from the right place, on the Internet are full of examples and drawings. I purchased the material and began to do. The photo of the process, unfortunately, did not do, did not think somewhere to upload, there will be only the result.
It is spent: OSB sheet 9 mm, a sewer pipe is 110mm and 50mm to 1 m each, a rope 70 m, carpet about 6 m2, and a trifle consumables - boards, corners and other hardware.
Size 1 and 2 tiers 90 * 50, house 40 * 40 * 25, Podcochetics 30 * 40. The height is about 1.5 meters. Of course, there are shoals, mainly by cutting carpet. Sadil on PVA glue, on the bottom of the furniture stapler. The house from the inside will also be covered. The rope to the pipe at the bottom of the garden on the self-tapping screw, then it's just so much wound, and at the top too, self-tapping screws. At the same time, they attached the corner to the pipe.
Well, in fact, the culprit) went to master.
The customer is pleased.
And then the rest of the muzzles pulled up, older
In general, I tried not in vain, which is nice. It remains only to hang some toy-beam for a small.
The plans to make a smaller house from the rest of the house, the mapping also lives there, but it's somehow later.
