The technique of a narrowing embroidery of the multi-cable and diverse, it allows you to create not only one-dimensional, but also bulk decorations. I suggest you with me to create a large openwork bead in the technique of a volumetric stitch. Our bead will have an oval shape and consist of 6 connected details connected together - 3 for each half. If you want your beads to get round, not oval, just do, instead of six details, eight, and in the center let the row beads.
So, in my bead used:
- a sort of 1.8 mM of Belarusian production (the thinnest of all types of a log);
- 12 neon beads Miracle Beads 4 mm (beads with a special reflective coating);
- Miyuki beads size 15/0;
- cutting;
- Mononite.
The design of the beads I invented on the go and in the process decided to replace the bright pink southeating with photos on the blue.
We start working with sewing six identical in the form of detail. You can make them all the same in color or, like me, two each kind.
I specifically placed a photo of the detailed in the beginning, that those of you who, at least a little familiar with a judicial embroidery technique, immediately learned this famous classic curl, pleased that they knew him perfectly, and boldly moved to the second part of this master class!
Part one. Making elements.
I did not upload photos of each stitch, in order not to tire readers with numerous repetitions. If you want to trace each stage of work in more detail, you can look into my very first, very, very detailed machine-class on a scentual technique.
So, we cut six small pieces of a southetic cord (can be less) and pierced them in the middle of a needle, tracing that the "Christmas tree" (drawing of the braid) looked at all segments in one direction. Fix the thread by making one stitch back, retreating 1 mm.
We take a bead and "hug" her judge, so that he remembers the form until she sewn.
We take out the bead and begin to flash all 6 layers of the stitch there, making small stitches, and keeping the desired bend. The soutout need to pierce the old to the central groove. Periodically insert the bead for fitting.
After passing the full circle, we sew together all 12 ends of the firm. Here you need to go back inversely three times, so that the place of the joint does not take place if you pull out the ends in different directions. And now when the circle is ready, we sew our beads into it.
It was possible to go and easily by flashing a separate circle, and inserting a bead right away. But in this case, the layers of the sution would be sewn with each other not throughout the circumference, but only three points. It is quite acceptable for flat works, but not suitable for bulk technology, in which the detail must be bend.
Now bend one half of the tails of the zipper, forming curls. It is better to lay all 6 layers at once, but one or two, so they will be better lying.
We take a thread back and, holding curls, begin to flash all the circumference again.
Now you need to fix curls with respect to the main part of the element. To do this, we leave the needle on the front side between the layers of the line, and the reverse stitch is also between the layers, but already capturing a piece of curl of the inside. These fixing stitches are better to make a couple.
The first curl is ready. Now cut off the surplus of the sution and sweep the tips with a lighter so that they do not shine. And then we repeat the procedure on the other side.
Part two. We collect beads.
We take two details, we apply them to each other by the sidewalls and notice 2 points, where we will sew them.
We sew, as usual, on the groove, but not through one layer of the line, but after two or three, so that when it is bending, in the finished bead, the detail is minimally deformed. From the inside we go through a needle into the groove of the two upper layers of the line, and then on the other element, we do the opposite: we go inside outside, again through the two upper layers. We repeat the procedure at each connection point twice.
Connect three elemental to each other.
We get half beads. And repeat Exercis!
Now you need to close the holes with the holes between the elements.
I used the cut of three different colors.
Now we go to the most important part - the connection between two halves of our beads. First we sew one beads between curls over the bead. Something tells me that you already know how to do it! Yes, the stitches are the same as when we connected the elements at two points, only now with the bead.
Then, after one top layer, we return from the offline to the top and pass the needle in the chittered beerink.
We ride on the needle a bead and another bell.
And come back through the bead back.
Now, with this "design" on the thread, we need to log in again in the chittered beerink, but from the opposite side of the outgoing thread. And one more seal to a story. This is done so that the chittered beerinka does not throw in one of the parties.
We pass through all three elements of our "design", moving to the other side to sew a free beading to the second billet.
Now on the sides of the beads, we sew two halves with each other through the bead.
Well, now it remains "just" to repeat this procedure five more times, moving in a circle (three times between the elementaries, and two more in their middle). The first three times do not cause completely no difficulties, but further, as the place of the junction compacted, it becomes more difficult to find a place for maneuvers with a needle from the inside. When crossing the last two pieces, the side openings become our salvation!
A little more effort, and our Bead is ready!
It can be used independently as a suspension, and several such beads will give a limitless expanser of your fantasy when creating earrings, beads or necklace.
A source