This master class is a great way to give the second multifunctional life of an old stand for knives. Now it will be possible to keep not only knives, but also gadgets. It is convenient for those who prepare new dishes, looking into online recipes, and for those who like to listen to music and watch movies while in the kitchen.
Materials
To make a stand for knives and gadgets, prepare:
- Self-coat itself;
- Small pieces of wood;
- carpentry glue;
- grinding machine or sandpaper;
- line;
- pencil;
- clamps or vice;
- Morner or water-based lacquer;
- cotton cloth for polishing;
- saw or hacksaw.
Step 1 . First you need to remove the old coating with a wooden stand. Use grinding machine or sandpaper.
Step 2. . In the harvested piece of boards, you will need to make a small groove. For the convenience of the board itself, put in vice. Please note that the grooves must match the gadget parameters.
Step 3. . Also apply to the stand for knives, where you place the item to support the tablet or smartphone. In this case, 25 mm retreated from Niza.
Step 4. . Make a groove on the size of the appropriate prepared part. She must be tight.
Step 5. . Both elements of the stand are treated with sandpaper.
Step 6. . Take joinery glue, gently apply it with a thin strip. Insert the harvested detail in the groove. Excess glue if you need to wipe.
Step 7. . After the glue dries, over the surface of the sandpaper, fine-grained.
Step 8. . Treat the product by the art or varnish. Give the material to absorb and dry, after polit the surface of the stand.
Ready!