Sometimes it's so you want to do something unusual, beautiful and most importantly - right. For those who want to update their interior or just make a nice gift, it will have to just by the way.
Materials:
- the same in size and form 4 small mirrors;
- glue pistol / silicone thermo glue;
- manual glass cutter;
- metal drill;
- Skipidar;
- sheet of plywood;
- Plasticine (optional);
- drill;
- alcohol / acetone.
Tip! If you have only two identical mirrors - this is not a problem. It can be replaced in a chess order by ordinary glass.
Step by step:
- Take the same mirror or cut from a large mirror with a glass cutter of the same size squares in an amount of 4 pieces for sides + 1 - for the bottom.
- On the sheet of plywood, put the mirror / glass, intended for the bottom, so that its edges do not divert.
- The surface of the glass / mirror is degreed with alcohol / acetone at the point of drilling holes.
- Establish the drill speed on the "unit" / "minimum". To avoid cracks on the glass / mirror, the drilling machine is better to use the drilling machine.
- Put the drill to the center of the outlined hole and turn on the drill. At the same time, slightly press the drill, effortlessly. During drilling to this place to add, slightly dripping on the mirror / glass, turpentine.
- For convenience, not to mess with the addition of turpidar, you can make a mug of a funnel from plasticine, into which it is then pouring it.
- On the edges of the mirrors to apply thermo glue and glue them with each other.
- During 15 minutes of drying, something is fixed for better mount.
- A source