The author of the work is La Luna (Irina Polycarpova).
This weaving I invented when the beads were collected with small flowerflowers from satin ribbons and polymer clay butterflies. The complexity was to ensure that these elements do not flip over the sock. Therefore, such a way of soiling beads beaded is suitable for those who are engaged in laying and assembling flower necklace.
Materials:
- Beads
- Beads
- Monofilament
Instruments:
- Bead needles 2 pcs. (not necessary)
Do not be afraid of this number of photos, in fact, everything is simple. For greater clarity next to the scheme of the process.
I will not indicate the sizes of beads and beads so that the weaving is versatile. The thread should be cut off at once, I measure the eye, but according to my calculations it takes about 8.5 - 9.5 cm thread on one link (i.e., braided beads, plus two beads between beads), it all depends on the size of the beads And beads. For a master class, I used a kapron thread instead of monofiti, because It was afraid that her photo would not be visible at all. I do not use the needles, and if you, too, will not be at hand - it is not scary. If you are weeping to the thread, you can dip both end of the thread in PVA glue and give dry, it will be a good replacement of needles, and the tips are sharp, and the thread does not wither.
First you need to choose a lock for beads or bracelet, I chose Togl and with the help of a simple looper fix the thread (photo 1-2).
Now weaving itself. First, type one bisper on both ends of the thread, then beads (photo 3).
Now on both ends of the thread, you need to dial such a number of beerin so that they get the bead completely, and do not forget that two bispers are already scored (photo 4).
And now it is very important not to get confused. I specifically in the diagram of different ends of the thread marked with different colors. In the first bead, the thread enters the left, then to the right in the second; And in the second bead, the thread enters the left, then right in the first (photo 5). When the ends of the thread are already trading to beerin, first carefully tighten the bead to the castle, keep your hand, so that it does not slip back, and only then tighten the ends of the thread one by one.
We drag on both ends of the thread, the bispers 1 and 2 now turn out and fall around the beads (photo 6).
Both end of the threads are in a bead (photo 7B) and through the two versions coming to the hole to the hole, we draw the ends of the thread as shown in the photo 7a and 7B (every end of the thread passes through both bispers) and delay.
If the previous manipulations you have mastered, then it will be easier. We recruit two beads for every end of the thread, then beads (photo 8).
Now we recruit such a number of beerin so that they woolen beads (photo 9).
We repeat the actions as in photo 5 and 6, so that two beads remain between braided beads (photo 10).
Now repeat the same actions that they did with the first bead photo 7.
Principle I think already understandable, it makes no sense to continue
Well, the result itself.
And here are the very beads with butterflies and flowers, from which it all started.
I wish you creative success!
A source