Even furniture can be performed in demanding now the technique of weaving from newspapers. In the master class, we are wearing a chair, which will cover the "Ebenic Tree" lacquer. The height of the furniture object is 60 cm, the seat width is 30 cm. The basis for the product was the old children's chair.
Tools and materials:
Clothespins
brush
scissors
knitting needles
PVA glue
newspapers
Varnish KH-784 "Ebenova Tree", 0.5 l
Glue "Moment Crystal" transparent
Weaving will start below. We beat each leg of the chair, then the bottom of the seating.
Separately we are wearing the center of the seating, then we place it on the seat and transport two rows about the backs of the back, now we carry out weaving in a circle to the edges of the seating.
Woven surface with PVA glue and supreme. We will make the oblique bending of the first row. Paint lacquer "Ebenova Tree." We continue oblique bending, leaving the bottom tube vertically, and we carry the skirt of the chair.
Corrugated cardboard plays the back of the chair. The back of collapses, on the edge of the back, we make oblique bending. From the long pigtail, we will perform hearts and glue the chair to the back of two sides.
Paint the entire braided chair 3 layers of varnish. Pave the layer of PVA and the supreme.
The seat of the chair is wept, starting with the cruciform of the middle. Dual tubes fold the cross on the cross, only 8 dwelled. More than 7 rows, dual stands, then give a square look and ween, arranging risers, only 16 standings.
The woven bottom harvesting is put on the seat of the chair, replenish the backrest at the base and we swear in a circle to the edges of the seating. Next, combine the risers of the top and bottom. We get double risers, perform the bending of the first row.
The ends of the risers will collect in the center of the seating and give a heavy item. Collect the seat and legs of the chair with varnish "Ebenova".
We will make a second row of bending, it turns out a braid. On the remaining vertical tubes we carry a skirt, weaving perform the rope.
Corrugated cardboard is an overlooking the back, on top. We have another stupor of tight paper. At the bottom of the backs, we glue the tubes and start sprinkling the rope. We end up to the top of the back, insert the tubes on the sides, which bend in half through 3-4 rows.
The top of the back is collapsed in shape, gradually narrowing the semicircle. Moving the bending in the form of a braid, as on the seat of the chair, only before the end, the ends hide. At the top of the spit back will turn thicker.
We are wearing a pigtail made of 3 tubes and perform a heart, the end to glue the "moment" glue, fasten the clothespin for the linen.
Without painted part of the chair cover PVA glue and leave dry. The whole chair will paint the "Ebenic Tree" lacquer.
A source