Have you tied up a sweater and do not get sideways to enter zipper?
This is the second way to cross the zipper into the knitwear. This time - with the needle. Perhaps he will inspire you or seem easier.
![zip8.](/userfiles/37/20212_1.webp)
For work you will need:
- lightning herself
- Four thin knitting needles
- Pins,
- Manual needle and threads in the color of knitting.
The product must be fully prepared and be surely selected and sucked.
Step 1 Slide the edges of the edge to which the zipper will be fastened. It is necessary to do this with a certain rhythm. which allows knitting pattern. Look like:
Step 2. Pinch pin and sew along the edge the first side of the zipper seam back needle. In this case, capture one knitting string and also in a certain rhythm. So far, do not adapt, check the quality of the sewing by moving the lightning slider. He should walk freely, without pincing the edge.
![]() | ![]() |
|
Step 3. If the result suits, sew the second edge of zipper stitches back needle.
Step 4. Fulfill the second side of the zipper and check the correctness of the zipper connection with the product, settling on the table. The product must lie on the plane exactly, without the slightest signs of the distortion.
Step 5. Send the second side of the lightning with two lines, in the same sequence as the first side.
Step 6. At the end of the work, remove needles and needles. Check quality again
Step 7. Claw slightly sip and dry.
The product is ready. You can wear!
A source