Materials and tools:
- Thin cardboard;
- Acrylic paints;
- varnish;
- Napkin with small pattern;
- wire;
- Threads thick;
- wooden bead;
- Adhesive Second, PVA glue;
- scissors;
- compass;
- Circumgars.
Bucket height without handle -3 cm.
With the help of a circulation, draw two circumference with a radius of 11 cm and 8 cm. At a smaller circle to carry out chord 7.5 cm. For the student - two parts of 6 mm in size for 11 mm, on one side rounded.
From cardboard cut bucket details. You can use boxes from tea, oatmeal, etc.
Second glue glue item on side seam.
Dno to lubricate glue so that a little glue came into the workpiece, put on the carton in size and tightly press. It is best to use thick PVA and the moment-gel.
After complete drying, cut the cardboard around the bottom circumference.
Thick the thread should be abundantly wrapped with PVA glue and glue as shown in the picture.
Details for a meek bend and symmetrically glued.
A thick needle or seer to make holes for the arms.
Color acrylic paint. The thick paint, the better. For hardness, apply a few layers with a drying. In order not to be traces from the brush, the last layer is growing with a sponge.
The last outer layer can be of any color.
Decorate a bucket pattern. You can glue a fragment from the napkin, to do this to pull out the drawing, delay the top layer and glue the PVA glue. If the background of the napkin does not coincide with the color of the bucket, then make Dorivka.
Black paint to circle bundles of buckets, in places to mimic chips, to which the stains of paint colors of rust are also applied.
After the drawing is dry, everything bucket is covered with several layers of varnish. You can use nail polish.
Make a handle.
Cut the wire with a size of 7.5 cm, bend it in the form of an arc. From one end to the rounds to make a loop, put on a cylindrical bead, the second end bend at right angles.
Loop insert into the hole for the handle, clamp.
Insert the second end with a straight angle, the rounds to make a loop and after, install it in the hole of the alignment and clamp.
Fix with glue beads.
Bucket ready!
If you paint silver, then get a galvanized bucket.
Vedeno in the interior:
Similarly, enameled jugs are made:
A source