This is an incredibly simple and extremely exciting occupation. You will need only a wire from sparkling champagne or wine that holds his plug along with a cap. And after the new year, the weddings, the corporate event or birthday, they will usually be a great difficulty find.
The resulting cute accessory is able to remarkably decorate the Christmas table or serve as charming furniture for your child's doll house. Also with this method, you can save an important memorable moment from the wedding bottle of sparkling wine.
The principle of manufacturing this decoration is extremely simple and obvious. If you saw this decorative element, then you did not think that he could so easily Make it with your own hands . You will not need a lot of time and strength, and the result will amaze and charm for a long time.
We make a souvenir chair from a champagne wire
Step 1: Required materials
To make this excellent decor element, you will need a regular wire that holds a plug from a bottle of champagne (by analogy with the image in the picture). Also need special pliers that are suitable for working with this material.
Step 2: Disassembly
Remove the wire that surrounds the bottle tube again, by spinning it ends and using wired pliers. A tolerate and carefully get the wire as shown in the image. The remaining item will serve as the base of the seating and the legs of our stool. And the cut piece of wire in the future will be needed for the construction of its rear back. Straighten this piece as much as possible, you may have better than on the image presented.
Step 3: Legs
The resulting cork design will already have 4 legs and seats, they must be stable and smoothly hold the chair. Turn the plug and see if a hard chairs are standing on the surface. If it is walking or falls, then work with legs, straighten them and bring the design to a stable and lasting position.
Step 4: Rear back
The remaining wire that you removed from the bottle tube can be used to make a beautiful back back. Form an attractive form as shown in the figure, in the above example, the back imitates chairs in the coffee shop. Or come up with your original and interesting template. Notice that the wire itself will be better and better, the end result is more attractive. Also leave a sufficient wire on both ends of the back for its fitting to the seat.
Step 5: Attaching the back
Attach the ends of the back to the back legs of the chair. Tightly screw the wire around the upper parts of the legs and the very stool seat itself.
Step 6: Completion!
Enjoy this cute and delightful miniature chairs made with your own hands. You can use it to decorate your housing or as a decor for any event.
A source