Beach rug made of terry fabric with a pad come in handy and on the beach, and by the pool. Thanks to the special handle, the rug is easy to roll and comfortably carry.
You will need:
- cotton fabric;
- terry fabric;
- needle and threads for sewing;
- filler for pillow;
- line;
- scissors;
- tape measure;
- Trikmarker;
- Portnovo pins;
- belt ribbon.
STEP 1
Cut (including 1 cm allowances):
From the terry fabric: the part is 70 x 180 cm in size;
Cotton fabric: part for a pillow with a size of 70 x 42 cm; Two oblique bays with dimensions of 8 x 182 cm and one - 8 x 70 cm.
Step 2.
Under the bottom cut, 1 cushion cushion plugs are fed by the purr.
The upper cutting part of the pillow can be pulled to the terry part of the front side to the front side, leaving in the seam an open area of OK. 15 cm for filling the pillow.
Step 3.
Top edge of the rug (see Step 2) Turn out on the front side and rest.
Runly bottom cut Pillow parts Pillow and touched into the edge.
Side sections of pillows stack at a distance of 5 mm.
Step 4.
Kosy beaks folded along in half and rest.
Both longitudinal cuts are turned on 1 cm wide and root - the width of Becks in the finished form 3 cm.
Step 5.
Both longitudinal cuts (including slices with a pillow) pinch to prepared beyks, and both upper corners are 1 cm and emit manually.
Step 6.
Kospey places along the cuts to stop in the edge. Through a hole with a length of 15 cm Pillow fill the filler and sew manually.
Step 7.
The bottom transverse section of the beach rug is knocked out oblique baker (see steps 5 and 6).
Step 8.
On the belt tape (length 224 cm) in the central part to postpone the length of the handle of 70 cm and fold 2 loops: the loop length in the finished form of 74 cm, and the allowances are 3 cm (clap and sew).
Ready!
