After the day spent on the summer garden or work in the garden there is always a desire to relax in a secluded place. It can be a gazebo, garden swings or benches. Today we offer you to make a wooden drum for a cable with a rocking chair. On such an armchair perfectly rest after the working day.
Master class, photo report for the manufacture of garden chairs
one . To parsing the drum for the cable, you will need a set of keys and heads. In the event that the carving rusted use the WD-40 aerosol.
2. . We are spinning studs that connect two cheeks. Do not throw away anything, everything will go into business.
3. . We take a hand milling mill, finger mill and make grooves in the form of a future seating. The depth of the groove is selected in the depth of the groove that is already available. New combine with the one that is already there.
four . That the bending of the seat was symmetrical to transfer the pattern by translucent paper with a trash.
five . We do the same groove on the other cheek of the drum.
6. . Feather drill holes for the screed of both halves of the future rocking chair. Whatever everything is exactly, you must drill both cheeks at a time. Thus, the studs will be perpendicular to the cheeks of the drum.
7. . Planks, which turned out after parsing the drum by placing in the grooves, which we previously turned about, consolidating the scotch.
eight . We twist the studs at the beginning, on the one hand.
nine . We collect the chair and tighten the studs, on the other hand.
10 . The finished armchair can be laid or paint into various colors to become your interior.
A source