The charm of the return stitch is that it is quite volumetric and beautiful, and can be applied not only in the embroidery of paintings, but also in the edging of any decorative product, for example, boxes, pillows, bags, etc. The return stitch in the embroidery ribbons is a kind of seam "Back needle", familiar embroiderers like "Backstitch". The essence of it is to circle, outline the contour, add realistic, completion of the embroidered image.
An example of a possible application of a return stitch when embroidering a basket loop
Return stitch embroidered a tree trunk (author - Irina Zhukova) Simple return stitch This stitch in addition to the embroidery of the main drawing circuit, is often used to fill the space between the embroidery elements.
1. Pull the fixed tape on the front side at point A.
2. Return back to the point in and through the wrong. Pull the ribbon again at point A.
3. Tension the tape and repeat step 2 from C point. Embroidery goes left to right. When working, do not tighten the tape, it must lie freely.
4. After the last stitch, pull the tape on the wrong one and secure it.
5. Stitches ready.
Basket Weaving are made by a simple return stitch
The trunk of the tree and the surface of the earth would look more comprehensive and careful if they were embroidered with a return stitch
The inscription is embroidered with a simple return stitch. Twisted return stitch. This stitch is more voluminous than simple return. To perform it, when working you need to twist the tape at each stitch, as shown in the figure.
The handle of the basket is embroidered by the twisted return stitch and the branches of the mint tree are embroidered with a simple tape stitch:
Author - Physalia
Simple ribbon stitch trunk of real wood is made by grooves:
Therefore, for greater realistic, embroider the trunk and branches of the trees are better than the twisted return stitch.
Topiaria trunk is also quite appropriate to embroider with a twisted return stitch - the perfect example of where you can use a twisted return stitch
Entry return stitch for this type of return stitch you will need tapes of two colors. If the second tape is narrower, you will have a very interesting stitch "barrier". It can also be used to embroide the loop of the main drawing or edging of any textile product.
1. Repeat the steps of a simple return stitch 1-4 to make the basis for the stitch cruise.
2. Start wrapping the main stitch with another color ribbon on the right left.
3. Help your needle, straightening the tape, it should be flat.
Step-by-step photos of returned stitches - Tatyana Akchurina (Aktatva) Tight stalks of colors can be embroidered with a return stitch ribbons of one color or different shades of green:
If you do not know how to embroider a bag of baskets, embroider with a return stitch edge of the Cover of Cabinets by the Return Stitch:
The edge of the edge of the pillow can also be completed with a return stitch:
A source