You have a protective border for cancer in the bathroom. Panel made of roughly broken ceramic tiles using a piece of mirrors.
To create a panel for the bathroom, we will need:
- centimeter
- 4mm thick plywood
- saw
- PVA glue
- brush
- Soft simple pencil
- shilo
- Tile ceramic tiles
- hammer
- A piece of burlap (or dense fabric)
- Sketch for tile
- Adhesive for tile
- Low with a flexible blade
- Thin Tiles for Bordeur
- mirror
- Soft brush
- Pulberizatr for plants
- Solminet for drinking
- Names
- Nazcachka
- Soft fabric
- drill
- Dowels
- Four mirror screws with convex cap
- hole
How to make a panel of ceramic tiles for the bathroom.
1) Cut a piece of glued plywood of the desired size. Processing the surface with diluted PVA glue. When the plywood dries, draw the fish and an asterisk.
2) Decorating the holes in all 4 corners of the plywood sheet.
3) Select ceramic tiles for mosaic. We split the tiles on fragments of different shapes (or we use ready-made broken pieces). Tip: Pre-wrap each tile in burlap (or tight fabric).
4) We make the eyes of the fish. Crackers for tiles will help us make mugs for glase fish. Then shilos neatly do the hole in the center of each circle.
5) We apply a little adhesive for tiles of NA drawing fish. We are placing mosaic cubes inside with a pencil contour. Light-gray cubes use for reel and tail, and dark gray - for a carcass of fish. We also choose the cubes of such a form, which would suit the drawing and creating the illusion of movement. Pink tiles lay out a starfish.
6) When fish and marine stars are ready, we break the tiles for the background. In this case, light blue were chosen. We apply a little attacking on the free surface, work with a queue with minor studies. We put the dice of the background on the adhesive and c power pressed. Watch it to close the holes in the angles of the plywood sheet.
7) Cut the narrow strips of tiles to short lumps and lay out the edges of the mosaic panel. Flooring for tiles we divide the mirror on small fragments and have them in wide intervals between the na mosaic cubes at one level with them. We do not forget to pre-give a little adhesive. Leave the mosaic to dry for 24 hours.
8) Spoon, smell dry attacking for tiles on the surface of the mosaic and a soft brush with a mixture of ELO in the intervals between the cubes of the mosaic. Holes in the alerts leaf leave free. From the pulverizer, spray a mosaic with a large number of water.
9) We cut the drinking straw on 4 parts and put them with holes in the corners of the sheet. We use a small amount of adhesive for tiles to overlay the mosaic around the cutting of the straw. We leave the mosaic to quit 12 hours.
10) Take out the straw and the sandpaper believes the remnants of the adhesive and polish the surface of the mosaic with a dry soft cloth. We apply a protective border to the wall in the bathroom and touch the scenes for screws. We use mirror screws with a convex cap, it to attach a protective border to the wall.
Ceramic tile mosaic Ready!
A source