1. The day of Valentine's Day and, although we have this holiday enough young, many congratulate each other and give little heart gifts. I had the idea of creating suspension with a bright heart inside.
Although it seems to me that such a thing can be given to any holiday or make to decorate your home.
Happy viewing!
2.
In total, I made six pendants of various shapes with hearts of different colors.
3.
four.
five.
Round very much resemble dreams. Although my suspensions have a chaotic weaving, but there is something in common.
6.
7.
So all the work can be divided into three stages. I will tell about each stage separately and detail (photos of materials will also be attached).
The first stage is the manufacture of hearts. For this, there will be forms (in my case silicone forms for baking cupcakes, they are flexible and blanks from them removed without problems) and plaster. Gypsum can be replaced by construction alabaster. But the solemn alabaster and it must be taken into account with the further staining of the hearts.
eight.
We divor the plaster with water to the state of sour cream and pour into the forms with a thickness of about 0.5 -1 cm. Thicketer should not be taken in order not to lose design. Insert trimming tubes for juice is future holes for thread.
nine.
Gypsum dries very quickly.
10.
The tubes can be pulled out to the final drying of the gypsum, and it is possible after - they have easily got from the gypsum blank.
eleven.
The surface of the hearts is flat, the edge turned out to be ribbed - beauty.
12.
Ready to paint.
13.
It is not necessary to paint the hearts in shades of red, I even have a brown. Painted hearts with acrylic paints, it is possible to cover with acrylic varnish for reliability, but I did not cover.
fourteen.
The next stage is the preparation of the basis on which the whole composition will hold. To do this, I needed a bank and thick wire. The bank is suitable for making a round shape, other forms I did manually.
fifteen.
Tightly stretch the wire, cut.
sixteen.
Wire ends connect with scotch.
17.
Found with twine. Start fixing glue. Immediately need to think about the mount. The photo shows how you can make fasteners during the winding: just pull the loop. The place where the loop is stretched well with glue.
eighteen.
This should turn out. But not necessarily do it. At the end there is a photo with a loop of a satin ribbon.
nineteen.
Glue, which I use during the winding (I welt the wire in several places).
twenty.
Ring is wrapped. The main thing to do everything neatly and securely secure the ends of the twine.
21.
And the last stage is the most interesting and creative - assembly and decoration. We will need all sorts of beads / butads / beads to the heart.
22.
For fastening a heart inside the ring I used cotton threads of linen color. Thread must be cut off about 1-1.5 m.
23.
The thread is intertwined chaotic, do not forget to drive beads.
24.
Ready suspension. The ends of the thread neatly hide.
25
For the loop, you can use satin ribbons to tone a heart.
26.
Little details.
27.
There was an interesting button with a rooster, the size is less than 1 cm.
28.
Friends, I hope that my job liked and most importantly inspired for creativity!
All the best!
Shared Olga Korneev.
A source