So today my master class is dedicated to this topic. I want to show how I make a maritime handbag that so likes to my buyers.
To work, we will need:
1. Fabric in striped (dense) 1m.
2. Denim tissue 0.5 m.
3. Fabric cotton lining and sealing 1.5 m.
4. The rope cotton twisted D is 12mm 1m.
5. Flizelin glue 1 m.
6. Plastic to strengthen the bottom 8x25 cm.
7. Reverses 10-12mm (4 pcs.)
8. Decorative decorations
9. Denim pocket 2 pcs.
10. Glue for fabric
11. Decorative tape 1.5 m.
12. Universal scissors.
13. Zig-knife scissors.
14. Chal.
15. Sewing machine, thread, needle.
16. Magnetic button.
17. Decorator chalk.
18 line.
19. Pattern bag.
So, proceed.
1. The first stage. A bag.
For the manufacture of the bag, you will need a piece of denim and a piece of fabric striped. Denim is the upper part of the bag, the bottom of the bag. The card consists of two parts. All sizes are indicated in the photo. For the top of the bag, I used a piece of denim with a size of 20x35 cm. As can be seen in the first photo, the patterns are arranged in the mirror reflection, I covered them and cut off with the allowance along the edge.
I used the fabric of the strip, I used the size of 40x40 cm. To do this, I folded the fabric in half, leveled the strips, fixed the pins, put the pattern and cut off with a break across the edge as shown in the second photo.
Both pieces of fabric should be glued with flieselin. To do this, put the flieseline adhesive side (dots) on the fabric and well stroke the hot iron so that there are no bubbles and races.
2.
To keep the bag well the shape, I additionally seal with a dense cotton fabric. In the first case, I have a blue fabric, in the second white.
3.
Apply the pattern and buckle in the mirror reflection.
Now you need to docile two parts of the bag in one. We cut the top of the pattern into two parts.
Apply face to face with a length of the side. Align the corners of the two parts of the bag. To do this, insert the pin into the corner of the pattern of one side, while the pin should get into the corner of the pattern on the reverse side.
Aligned in the corners, they embalted and stitched on the sewing machine. Cut up too much. The seams are smoothed.
That's what should happen.
four.
The upper part was sewn. We turn around the fabric in half, align in the seam, we try to stripes also coincide, fix the pins and flash the mark on the edges. Now we take the pattern of the lining and on it equal to the bag. Discerge the contour with a marker or chalk.
We flash along the line on the sewing machine. Cut off all the excess scissors Zig Zig. We smooth all the seams.
five.
We form the bottom of the bag. Close the corners at the bottom of the bag. To do this, align the middle of the bottom with the side seam. Fresh pin and flashing on a typewriter, fixing the ends (there and here).
The width of the bottom of the bag should turn out to be 8 cm. To check, flashing corners measure the line, they must be the same on both sides.
6.
Turn the bag. Sein pockets and decorative tape. Pockets must first be necessary, and then flash on the sewing machine. I sewed a decorative ribbon manually, but you can also on the sewing machine.
7. The second stage. Lining.
Cut 2 pieces of fabric for lining with a size of 40x40cm. Write the pattern. We use only one piece of fabric. We will make a pocket on it.
eight.
We need a striped tissue with a size of 25x23 cm. We fold the fabric in half. Stroke.
We begin around 1 cm. And again stroke.
,
We apply your pocket, align, sweat and flash on the sewing machine. The finished pocket is obtained by the size of 22x10 cm. I divided it in half and flashed with double seam.
nine.
Now we take the second part of the lining, put face to face, mock.
Wrong on the pattern so that the pocket is in the center. We stitched on the typewriter on the sides of the pattern, we flash 5 cm. On each side, fixing the seam (there and here).
Cut all the excess scissors Zig-knocked. Corners stitch as well as bags.
In the middle of the bottom, leave the hole so that the bag can be turned over through it.
Lining in the finished form.
10. Third stage. Build a bag.
Now you need to insert a lining into the bag. You need to paste face to face. The bag is turned on the wrong one. Do not turn the lining on the wrong way, insert it into the bag in this form, as in the photo above.
Align the lining with the bag over the side seams, the attitudes pin, mock and flash on the sewing machine. Cut the unnecessary, stroke stroke.
Soak through the hole in the lining.
We smooth the top edge of the bags, mock and flash on the sewing machine.
eleven.
Insert plastic on the bottom of the bag. Size 8x25 cm. Corners round. In several places, I applied glue to the bottom of the plastic and stick to the bag.
12. Fourth stage. Installing the button in the bag.
Align the bag over the side seams, fastened clips. We celebrate the middle of chalk, make a hole for the button.
We insert the foam, strengthen the leather insert, glue glue to the wall of the bag. Also doing on the other hand.
13. Fifth stage. Installing chalks.
Align the bag on the side seams. Fix the clips. We apply the champs to the bag, retreating from the edge of 4 cm, on top 2 cm, celebrate the machine to the chalk. Clamps do not remove. Call-marked points first pierce the D-10mm Punch. Punching two sides of the bag at once with the hole so that the holes are symmetrical. Removers insert using a device for installing chalks.
14. Sixth stage. Pens for bags.
We take a cotton rope size of 1 m. We insert into the records.
The ends of the rope are sewn threads.
Align the handles and sew them together
Decorating the handle with a denim cloth.
To do this, you will need a piece of fabric with a size of 10x15 cm. Edges bend, sample, stroke.
We decorate the side sides of the handle. It takes a striped fabric of 25x5 cm. Cut in half, bend the parties and smooth. One end of the fabric is sewn to the rope, the second end is wrapped around the handle. Sevive or glue. We decorate the anchors. I glued them to glue.
Well, that's all the bag is ready.
Bag decor can be like that.
And such:
The size of the finished bag: width 30 cm Height 20 cm. Easy and comfortable. You can wear on my shoulder, you can in your hand. If you have questions about the master class, ask, answer everyone.
