Sometimes there is such a situation when your favorite feathers (parrots, amadins, quail, etc.) led offspring, and your cell has already become close to such a big family. There are only two options, either say goodbye to the young, or translate them into a cage by spacious or aviary.
Today I want to tell about a simpler way manufacture of aviary for birds with their own hands Using simple and affordable materials (plastic grid and PVC pipes). The advantage of PVC pipes In the fact that for the manufacture of the aviary, you will not need any complex tools. Moreover, if the pipes are not glued, then at any time you can enlarge in size or absolutely disassembled at all.
For the manufacture of aviary for birds with your own hands, we will use 1/2 "PVC pipe. After pre-cutting the pipe to the required segments (the size of the enclosure in this case is 140x85x50cm).
The process of manufacture of aviary will be much simplified if you manage to find the corner tee. In this case, only one pipe with a diameter of 3/4 will be used as a frame.
If such a tee is not found, then it will be necessary to make each wall separately and combine them with bolts.
When assembling the walls, the glue is not needed, because the pipes are so securely fixed in the fittings, and the grid will additionally strengthen the design.
For doors, instead of hinges, you can use ordinary bolts, for this, one bolt can be screwed into the frame and fix the nut, and the end of the bolt will be inserted into the door hole.
As a lock on the doors, you can use the usual hook.
The lower part of the enclosure is used as a pallet, it is not attached to the main design, and should be freely stretched out of the aviary. For convenience, you can fasten the handle, and the frame is closed with sheet plastic, plywood or fiberboard.
For the fence, a plastic grid was used (which now became popular and can be purchased on the host market). Such a mesh is produced with different cell size (7x7mm., 8x6mm., 10x10mm., 15x15mm. Etc.), so choose the size that most corresponds to the size of your feathery. You can use conventional plastic clamps to fasten the mesh to the frame.
When the aviary is assembled, it remains only to install the shelter inside the shelter, and if you wish all sorts of toys, after which you can run your favorites.
How do you see Make an aviary for birds with your own hands Easy and easy, and it is quite possible to hide in one day.
A source