Installing denim buttons manually at home by prudent means

How to install a denim button manually for jeans? How to remove buttons on jeans ?

Dimensions (diameter) of denim buttons: 14mm, 17mm, 19mm, 20mm, 22mm, 25mm, 26mm, 30mm, 40mm. (It matters when selecting buttons under the loop on the product)

Depending on the type of denim buttons, it is installed on a special denim carnation:

a) with a circular notch,

b) smooth all-metal,

c) metal smooth tubular

For installation manually, denim carnations made of aluminum are more suitable, try to use only them. They are easy to handle and are less inferior to steel.

- Types of denim buttons and ways to install them.

one. Denim buttons on a stable leg

As a rule, this metal shell filled with impact-resistant plastic. Button is installed on a denim carnation with a circular notch.

The fabric (leather) is pierced at the installation site (leather) with a handbroken, seer or nail. Insert denim carnations.

and

We score as an ordinary nail, but not with all the power.

Denim buttons on a stable leg are the most durable in operation and easy to install.

Also produced denim buttons on a plastic basis.

Without a metal shell. Require special attention when installing. When driving a denim carnation, it is necessary to observe accurate centering, otherwise the button will split. Better do not associate with similar products.

2. Denim buttons on a stable leg with a hole

Button manufacturers recommend setting them on smooth denim cloves. All-metal

or tubular.

Since it is difficult to install buttons on these carnations, it is necessary to follow the accurate center, you can use the jeans clove with a circular notch.

We install in the same way as in the above case. But additionally spare the tip of the denim carnation after installation.

In order to finally fix the denim carnation.

If you install for smooth denim carnations, it is often longer than it is necessary.

We shorten with the help of passage to the required length.

And install with a bolt with a diameter of 5mm.

Installation We produce buttons on a metal surface.

3. Denim buttons on a broken leg

Installation is made on a smooth wooden surface.

It is installed on a denim carnation with a smooth rod.

Either on a metal tubular.

When installing buttons (hammering) difficult to comply with the center

You need a tube with an inner diameter of 9-10mm, 30-40 mm long and a rod - a bolt with a smooth hat with a diameter of 9mm, 60mm length.

If there is an end key with a 9mm diameter, we use it.

They scored denim carnations, checked, twitch the installed button.

In the case of the installation of a denim buttons on a metal tubular carnation,

Use the tube with a diameter of 10mm or the end wrench with a diameter of 10mm. And just as successfully install the button in the right place.

It is also necessary to take into account the length of the standard denim carnation depending on the thickness of the tissue, at the installation site of the button.

The thinner the fabric, the less should be the length of the carnation. The length of the standard all-metal denim carnation is 10-12mm, the length of the metal tubular carnation is usually 8mm.

If necessary, the carnations inhibit to the required length with the help of the passage.

four. Denim buttons on a broken leg with a hole:

Install on the all-metal smooth aluminum denim carnation

or on a metal tubular.

Install on a flat wooden or metal surface.

We break the fabric (skin) at the installation site, insert denim carnations.

If it is long, weching superfluous.

And what would be painful with the top you can come with a file.

Next, the process of installing the buttons.

Use a cylindrical rod with a diameter of 4-5mm., You can an ordinary bolt.

The process of installing a denim buttons can be simplified if you use a jeans clove with a circular notch.

We clog the carnations, as in a button on a stable leg (see above).

True from concave it will become flat, if it does not confuse. To finally complete the installation of buttons, we split the tip of the protruding jeans carnation.

Since these carnations steel to cut them more difficult, most importantly, that would later be scratched. Split a little and enough.

It is difficult to install these denim buttons on metal tubular denim cloves.

They are made of steel, a considerable effort must be made for arrow. If the centering is non-compliance, you can deform the button and carnations itself.

Conclusion: The easiest way to install this type of denim buttons for smooth aluminum carnations is the easiest.

5. Buttons on a double carnation:

Distinctive feature of a solid bottom of the legs of the buttons.

Which is then punctured by double denim carnation.

A mustache carnation then bend towards each other.

The main disadvantage of this type of buttons is often one of the fastening assholes.

Install manually easy: we break through the two holes on the reverse side of the button.

I pierce the clove fabric, we put a button on it and the tips of the carnations bend a narrow screwdriver in the inside of the buttons.

We remove the remains of the denim buttons:

Typical case. On jeans with a broken button broke on a broken leg.

The property of this type of buttons - with a high load jump from the rod.

Remove buttons removal. Remove by side or passage in one movement.

A source