In Africa and Indonesia, where coconut palms are most actively growing, this species DIY Most common. Adults and children are engaged in them. These are mainly tourist products, but the inhabitants of these countries are used actively coconut and in everyday life, namely, in their everyday, since the material itself is environmentally friendly.
Mattresses are made from coconut fibers, which are more pleasant to sleep and useful, as well as homemade utensils. I want to tell you how to make a coconut handbag with my own hands without much material costs. In my opinion, it turns out an excellent wonder that can pleasantly surprise. And so that we need to make crafts. Materials: Coconut - 2 pieces. Lightning - 15 cm brown. Threads of dither brown color. Cut of brown rope.
Instruments:
- Metal hacksaw.
- Knife.
- Lobzik isometric.
- Scissors.
- Drill with a drill.
- Sandpaper.
- Wax and flannel napkin.
- Needle gypsy.
- Knitted hook.
- Tea spoon.
Buying coconut, for your decorative handbag pay special attention to the form of the future product, the walnut itself is not the same one, but in this it is plus, I recommend adhere to oval, elongated forms. Spherical shapes are also suitable, but it is more difficult to work with them, and in particular it is better to use them for other crafts.
Acquired coconut has three holes in the back of the rear. From this side, we make a cut with a cutting metal, a cut diameter of 3 - 4 cm. Do not make a slice very large around the perimeter - it is ugly. Lightning length depends on the cut, if there is a small diameter in your opinion, it can always be increased. With a knife and teaspoon, remove the fruit of a nut shell, after removal, the edge of the cutting from the hacksaw is cleaned with sandpaper and proceed to grinding the entire shell.
Starting with large numbers of skins, and ending towards a decrease. When coconet will chain the view of the living marble, go to the polishing, take the wax and rub the flannel napkin and proceed to the polishing. Having finished, the polishing turn over the workpiece cut part down, so we put on a sheet of paper, negate, after cutting out with scissors. It will be a template for the lid.
Applying a template for a predetermined and polished shell, stile and cut out the logs along the contour. Clearing and polishing the edges, proceed to markup and drilling holes. We place the main workpiece, retreating 5mm from the top cut, placing the holes around the perimeter with an interval of 7 - 9mm, and also place two holes for fastening of the cords, retreating from the edge of the slice of 15 mm, put the label, and we also do the same on the other side.
The lid is also placing, after which we get to drill the holes with a drill, with a diameter of 3mm. Having finished drilling, we will apply zipper around the perimeter of the diameter of the main workpiece, and we see what kind of length is needed. An ordinary crochet for knitting, we bind both billets. Receptions can be found in knitting literature. It all depends on your fantasy, what pattern you attach to your product.
A source