Ob belt is a wonderful accessory to emphasize the waist and add a highlight to the outfit.
1. Materials: I chose artificial skin, but belt Ob can sew from any favorite fabric or skin. We need fabric, sewing machine, threads, scissors, pencils for grids, ruler.
2. Pattern. In order to sew a belt, we need to cut 4 details: 2 belt parts and 2 - strings. On paper, I only built half the belt, the second symmetrical. The length of the belt is half the waist girth, the width of the BB = DB = 7cm, BV = 1 \ 4 waist girth, ae = 3cm - the string width (the length of my belt is 65 cm, therefore the length of the pattern part 32.5). Details of the strings are two rectangles of 8 cm wide (of which 2 - allowances) and a length of 1 \ 2 waist girth + the desired length of the ends (approximately) 30cm (parts of my strings 65cm). Do not forget to add 1 cm per battery over the entire perimeter of the belt (dotted line in the drawing).
3. I translate the details of the pattern to the withdrawal of the fabric.
4. All outline details.
5. First, we sew the belt strings, I'm smoking the edges of the pins, then pulling out the typewriter.
6. On one side of the edge of the strings a little spinning.
7. Scroll to 2-3mm to reduce the thickness. If the tissue is strongly crumpled the edge, then you can cut the battery less or even left as it is.
8. Soak the strings.
9. The strings are ready, slightly revehaning them through a thin cotton fabric.
10. Staying ties on the belt detail.
11. Ha ha, a riddle for the eyes: find the belt on this photo :). I put the second piece of the belt to the top and I spoil all together, carefully fix the ends of the strings, so as not to run away during the stop.
12. I leave a small part of the line open, so that you turn the belt through it.
13. I cut off, turning the belt, launching the left hole.
14. Revenge the belt and everything is ready!
A source