Today's master class deserves the attention of needlewoman and fashionistas, we will weave Bead necklace with your own hands . The main foxhne tendencies for precious jewelry and jewelry remain unshakable for more than one year. These are minimalistic geometric shapes, massive ethno-motifs, and of course all sorts of hand-made products. We will make a chic black and gold necklace, it is perfectly combined with the autumn-winter wardrobe. His creation will have to spend a lot of time, but the result is worth it. The technique of the presented weaving is not difficult, it will be able to understand even a beginner in the beading. To gain experiences, make flowers from beads.
Before you start making Necklace with your hands from stones You will need to be stocking: Dark agate in the form of a droplet, about four two cm; Rivoli Swarovski (Jet 14mm 2 pcs, Crystal Golden Shadow 18mm 2 pcs, Crystal Golden Shadow 12 mm 2 pcs, Jet 14 mm 2 pcs); Czech beads with grain 8 * 6 mm; Swarovski Beads (Xilion Beads 4 mm, Topaz Xilion Beads 4 mm JET); Beads Toho (TM-03-49, TR-08-22, TR-15-22, TR-15-49, TT-49 or Delica №11); Beads Czech №10 # 17020, Golden Castle; 2 callers; two rings; Thread Capron, super - glue; Slice of skin and fliesline.
How to make a necklace with your own hands, we will consider step by step. If you have a bead jewelry, I advise our master class: bead bracelets, weaving schemes, a detailed description. For a cabochon substrate, I add fliesline in several layers. I stick the agate with glue to the base and leave for a couple of hours, pressed with something heavy from above. When the glue drop, I start to wash the stone with beads as follows: sew two beads, on the wrong side of the stitch back to one bead, we take the needle on the outside and pass further through the other.
At the end, certainly, finish two beads, otherwise the order in the subsequent row will break.
Next, we go up on the principle of mosaic, count the number of rows based on the size of your particular stone. In my case, there are enough two lines of divisika. To pull the framing of the gossip of a couple of rows with smaller beads.
Next step in manufacture necklace from beads do it yourself - Wash the agate in a circle. We framed on one bisper technique like "Ibelka": we sew alone, I return the needle to the beginning, I bring it on my face and I firmly, I just crawled to beerin.
We alternate golden number 8 and the magician through one.
Cut off unnecessary fliesline, leaving one mm from the edge. The main thing is not to rush to not hurt the seam embroidery. We supply agate on the contour on a piece of leather, cut out with not big letters. We glue the skin to the phlizelin, again leave to dry under the severity of several hours.
Necklace with your own hands
In the meantime, we can proceed to edging of the rivoli, start with a golden size of 18 mm, we make a ring from 48 beerinic. Next we make a row of black material on the principle of mosaic. Scheme 1 shows how to determine the facial part of the framing.
When the facial part is ready, we insert the rivol, fix it with two rows with an inside with a small golden bead.
We recruit cloves, with a space in two protruding beads.
Making arcs from nine small black beads, the teeth are inside, in the center of the arc. We bring thread from the center of the Arch, we gain 3 small gold bispers on the needle and pass through the center of the next arch. Then we do the same, only now through the middleings of the Golden Spirit, we do in one black bead on one black bead, we draw a thread once again in a circle and delay.
Thread leave in the middle of the edging, in the side of Rivoli. In Scheme 2, it is shown how to make openwork weaving around the edging. If you are difficult to figure out the drawings, you can see necklace your hands video.
In the first strip we ride two 2 small black beads at the edges, between them one color topaz 4 mm. We go into the framing beer, come out of it, penetrate the last little black bell.
We recruit on the thread: one small black, bead, two black bispers. So we turn to the last row.
The final row: between the black bisper is one bead, we go to the first small beerink from top to bottom. We pass through the initial bisper of the opening of the edging. From the bottom up we skip the thread through the first little beerink and we take before the bead. We make arches of three small black, the items and three more. So we ride to the end of the row. Complete the pattern by passing between the formed arches according to Golden Beverage No. 10. Similarly, we decorate the second crystal.
Rivol in 14 mm framed a ring of 36 beads. Necklace with your hands photo Shows what scheme to weave the front side.
From the wrong side, we make a small bead for a screed two rows to close the amalgam.
Make arches with small golden beads, five each. Between them, we place three black bispers. Complete the web, traveled one golden.
In 4 scheme, it was shown how to make openwork weaving around the crystal. In the first row we go in such a manner - Bikonus, then Golden No. 10, the Icatam, Golden No. 10.
Then passing through the previous row, we make arcs over the beads: two small black, beads number 8 and two more blacks. Frame for crystal 12 mm weaves according to Scheme 5, openwork design - according to Scheme 6.
We derive the needle from the middle of the edging of the crystal, we ride 1 black small bead from the edges, in the middle of beads number 8, penetrate the next central bisper of the edging.
In the meantime, our agate is ready for further processing, we are engaged in the "Russian way". Ib must come in between the skin and fliesline, hiding, so the nodules inside. We ride the beerin, we pass through all the layers from the turn of the face. I must enter the needle before the bead, spending under the thread and delay. We get kart, where the beads are laid sideways.
According to Scheme 7, we make a pattern around the droplet. The first row is typed from the colors of the topaz and black. The subsequent row consists of arcs of small bispers and the items. Then a row of black beads, gold bead No. 8, small black and divisions. So that the last row is not pulled and not Faldilo, select the number of beads at the place of the rounds individually.
How to make necklace with your own hands From the resulting elements. Assembly Case Purpose and Creative, you can dial the connections as you like, the length of the necklace will depend on it, but the appearance will not be worse. I will briefly explain how I collected the product: the first to connect agate with crystals of 1.8 cm through a round bead and a divika.
Then make an arc over a biconism on the cabochone. We pass through the middle of the arc. Cabochon and Rivoli connect bikocus. Bonding the rivoli of 1.8 and 1.4 cm. With the help of bicciuses and fine beads we collect the rivoli of 1.4 and 1.2 cm.
We remove the thread from the rivoli of 12 mm, we recruit beads and beads to finish the product, expect a length individually. We cling to the castle to it secure the lock using the connecting ring.
On this necklace your own hands master class It came to the end. Elegant necklace is ready!
A source