The cool idea of the lamp, which is sitting on the moon of a man for a children's room.
For the manufacture of the moon, a material similar to foamed plastic is used. It is usually used to pack electronic technology.
But this is not a foam, although it can use it for this purpose. Sheets with a thickness of 20 mm and about 300 × 400 mm in size. You can glue three sheets to get the desired thickness. Adhesions "moment" and for a day under the press.
When the glue is dry, the sheets have become one.
On the resulting billet, draw the moon outline by a simple pencil.
Cut the moon.
It was possible to first pinch the workpiece and paint it with golden paint from the titer, but if you want to get the effect of a shaggy surface., To begin with, it was necessary to cut all the ul, to form a rounded surface. Then shrill the moon with sandpaper. Then paint acrylic paint with tassel and, without waiting for drying, sanding the surface again. It turned out yellow, tender, shaggy moon.
Now it is necessary to stretch the wire for light bulb inside the moon. It is necessary to bend the needle for knitting number 3 and gently scrolling her hole in the moon. Then the wire extended to the resulting hole.
At one end, the bulb is mounted on the wire, and the other will serve as a suspension. By the way, the wire can be used color. On the cartridge to wear a piece of metal pipe of a suitable diameter. If there is no pipe, you can put on the cartridge glued from the foil tube or sew a brilliant tissue with a wide belt, which will close the entire cartridge.
The legs for the little man can be sewed from a green cord. The feet are cut out of the same packaging material and is trimmed with a terry multicolored cloth.
The handles are made of the same from the cord, the balls made of fabric are sewn instead of palm. Carefully glue the handles and legs to the metal tube with a glue gun. Pens tie ahead with a light knot, as if the little man folded his pens on the chest.
This is the result.
A source