Today I want to post 2 masterlands on the sewing of the lush skirt.
I will sew a skirt for a girl with a waist volume of 55 cm, the thighs of 62 cm, the length of the product is 20 cm (you, of course, will be your sizes). To do this, you will need:
1. 1 meter of fate with 1.5 meters width for top skirt
2. 1 meter atlas for lower skirt and belt
3. 50 cm gum width 2.5 cm
4. 10 meters of oblique bay
5. Threads in the color of the material
1. We take fatin, we fold 2 times, we draw it on the strip with a wide 15cm + 1 cm allowance = 16cm. As a result, you obtain five strips of 16 cm wide 1.5 m long:
2. Starting strips among themselves, as a result, it turns out a 7.5 meter strip, 16 cm width:
3. I decided the edge of the skirt to treat oblique baker, because at the expense of it she is very beautifully holding the shape. Therefore, we sweat the oblique beyk and we feed to the edge of the skirt:
4. Stead 7.5 meter strip in the ring:
5. Marking the tension of the lower thread 0, then you need to stop 2-parallel lines along the edge, which will check for the belt:
The following should turn out:
6 pull these lines .... It turns out the upper skirt, which is postponed to the side:
7. We take the atlas for cutting the bottom skirt. We fold the cloth in four for cutting the skirt 20 cm long, the zone radius will also be 20 cm plus 2 cm allowance for feeding the skirt to the belt and niza bending:
8. From the same atlas, we cut the belt-rectangle with a length of 60-70 cm, 12 cm wide, we give fliesline:
9. Step the rectangle-belt in the ring, pre-leaving a non-refinite place in length 2, 5 cm for further rubber band (marked red):
10. We fold the ring with the invalid side along the bats, affect, we give a line 2.5 cm to invent gum. It turns out:
11 The belt is ready, then we feed the lower skirt to one side, pre-outowing or pumping folds, if necessary:
12. In the same way, we feed the fate skirt in the same way, inhaling the gum into the belt and we have a magnifying skirt:
one.
Master class 2
Today we will need the following materials on a model of 25 cm long:
- 2.5 meters of Capron;
- 0.5 meters of any stretch material;
- 2 cm rubber band;
- Threads in the color of the material.
Measie: from- 38, OB-40.
1. We start with Ryusha. Crow on scythe from Capron strip 10 cm wide - 13 pcs.
2. Cut:
3. Processing the edges of each strip from two sides along the length on the sewing machine using the line "Zigzag". You can also on Overlock, who like it. Do not forget slightly stretch the fabric in the process of overpopulation for the formation of a beautiful wave
4. That's what you should get:
5. Delay ready-made strips to the side. We take any fabric stretch - it may be knitwear, knitwear "oil", crepe - atlas, etc. I had the rest of the Satin, the color is not suitable for Ryusham, since I use what was at home))).
We cut from the fabric rectangle in size of 80 x 25.
6. Step rectangle in the ring:
7. Customize the stripes based on exactly in the middle, laying folds. The folds must be made more often so that the skirt turns out to be magnificent and the air rushes closed into the ring, the end of the fabric hide in the folds.
8. When the first row was fed, it must be found on one straight, so that it is easier to sew the following series.
Like this:
Distance between rows - 1cm.
And so a row for nearby dress our skirt:
9. The last row is applied at a distance of 5-6 cm from the edge of the skirt:
10. Went this edge, make a scenery for gum, insert the gum:
11. Skirt is ready !!!!
Posted by: Fimk @.
A source