MK from - Rafaellaa.
We need:
1. Fabric weeping 1.5 m.
2. Singry procession.
3. Lining fabric.
4. Accessories: buttons, threads.
I chose a bright blue cloak fabric.
The pattern I designed myself. I sewed on a similar pattern blouse, and partially used this pattern for tailoring jacket.
Made 2 cm indents at the edges and 5 cm from the bottom of the details. On the front shelves, where the fastener will have, I retreated 12 cm.
Now we need to spread all parts of the lines with an interval of 6 cm.
I chose a sintepon without lining. We lay out all the details on the syntheps, face up, and cut out the identical parts from the syntheland, the bottom (5 cm) do not take into account.
Next, we need to flash these stripes. I first squandered the details to make sure that the jacket sits well on me, and then stitched the stripes.
When the details are ready, sew the product. Do not forget that we have pockets, we leave the holes.
Cut the burlap for pockets and sew each item first separately, and then stitch together.
Sevive sleeves.
We process the neck, cut out 3 semicircles for two front shelves and the rear. We apply to the face of the jacket and sew it first separately, and then stitch together. The seams in and the neck is processed.
I sewed the lining on the same patterns. We sew lining to the sleeves, and then to the neck and to the shelves, the hem. Do not forget to leave a small hole in the lining, so that it is possible to turn the product when you select a lining.
We make a markup where the riveting should be, we pierce the holes with a special tool. And then put the riveting.
Result!
Skirt is also my handmade!
A source