As global practice shows, the relevance of handmade things every year increases, and Handmade is becoming increasingly popular. Modern girls and women are more active in needlework, creating decorations, clothes, interior items, even make-up cosmetics. And we are here, fashionable and beauties, are no exception. So let's create an interesting and relevant handmade little thing today - a lace bustier.
Before starting work, we will need to build a form of a form of a form of a form balcony or find a suitable on the Internet. I went on the second path and took the finished pattern. Another important point: if we sew a bra or bustier of elastic tissues, then you need to take into account the percentage of tensile tissue or lace. If the percentage of extensibility is less than 10%, then the pattern take size in size; If 10-20% is less than less.
So, for sewing, we will need these materials and consumables:
- elastic lace width of about 15 cm;
- Lowering elastic bands of two species - ordinary and for Berechel;
- bones for bra;
- Threads, needle, scissors, sewing machine;
- Patterns.
1. I cut out the front and rear waist parts of the bustier from the lace. Do not forget about the allowance of about one centimeter.
2. Cut from the fabric details of the cups - upper and lower. We also make an allowance of 1 cm.
3. We connect the upper and lower parts of the cup and the side cuts of the belt part - we sweat, we flash on the sewing machine with a stitch length of not more than 2 mm, process the edge of the zigzag or on Overlock.
4. Processing the jumper between cups. To do this, cut off a piece of rubber band for strapless in the size of the jumper itself and sew a zigzag.
5. We connect cups with a belt part of a busta on the sewing machine and process the edge.
6. Measure the segment of ordinary lining gum, in size equal to the length from the cup to the cup through the back. Cut and sew to the top of the belt intermittent or frequent ordinary zigzag.
7. Cut two of the same piece of rubber bands equal to the length of the bone plus over the half-meter on the bending. We make two lines along the edges of the rubber band and insert the bone in the resulting stem
8. Send manually to bustle straps.
Ultimately, we get such a nice bustier.
Since we used elastic lace and cost without foam inserts, we had a very comfortable and non-shivering movements underwear. To adjust the shape and position of the bust, it will not work, but for easy support and aesthetic pleasure just right.
Thank you very much for your attention and interest in the article! I will be glad if my master class is useful. And I will be insanely nice if any of you take advantage of the idea and divided by photos of a bustier or bra sewn through the lesson.
Share Jewelry by Irina Terencheva.
A source