Suspended chair-hammock. Master Class

With the word "hammock" it seems an old shady garden, a light breeze, a pleasant half-time ... However, you can hang a hammock not only on the tree, but also on the veranda, and even in the apartment.

1. Cut the fabric to 2 square 1.5 x 1.5 m. Each square fold four times and with a centimeter and a pencil outline a quarter of a circle with a radius of 65 cm. Take out 2 circles. Rates from the edge of 4 cm, read the line.

2. Follow on one of the circles of the slot for fastening the belts (see the scheme). Fold four times one of the tissue circles - the fold line will be axes. Two belts should be placed in relation to the axes at an angle of 45 ° - to make a label, strain a quarter of a circle one more time. Sick from the mark to the center direct and mark the slot (see the scheme). Then - the second upper slot. To place the two bottoms, measure the distance between the ends of the axes and divide it to 3 (see the scheme). Place the circles folded on the smooth surface, which should be placed on top. Pay attention to the direction of the part of the details - it should not coincide, then subsequently the fabric will be less deformed. Scaliate parts by pins. Cut the outlined slots and "repeat" them in the lower circle.

3. Unscrew to the wrong side of the "petals" of the slots, on top - for strength - outset the segments of the brokem. As an option, instead of the Broken Tips, you can offer Dublerin - Clean these parts of the circle, and then only cut the fabric. In this case, it will not turn around the edges. Save the prepared slots along the edge, retreating 3-4 mm from it.

4. Still both details of the cover at a distance of 4 cm from the edge. Leave the hole of this size at the bottom so that the hoop frame is inserted into it. Take the scissors of the battery of 4 cm by making the edge toothed. Remove the cover of the chairs and reveal it.

5. Cut the synthetic tube strips and squeeze the hoop into it. It is better to take more of the synthet board so that it makes it easier for the hoop. "

6. Insert the hoop into the case and, shifting it inside to the edges, sweep the case of about 7 cm from the edge.

7. Tweet and scalp the allowances of the allowed holes, turning them into withcase. Then sweep the edges of the hole and shoot them on the sewing machine, retreating 3 mm from the edge. Shifting the hoop to the stitched edge, sweep both parts of the cover (by analogy with clause 6).

8. Cut the syntheps, wrapping the hoop in the slots of the cover, shift it on the hoop inside the cover and fix the thread. Draps around the perimeter Sust in the secret seam. By completing them to process, fix the case on the hoop: at the mark, at a distance of 7 cm from the edge, touch it as a cotton mattress. Firm the case through multiple stitches using a solid thread, then fix it. Repeat the stitch at an equal interval with an interval of 7-8 cm - then the dense denim fabric will be free to gather soft folds.

9. Cut the belt tape or the sling on the segments of 2 m long. Place its ends over the fire. Wrapped the hoop to the end of the ribbon, scroll through it with pins and push (see the scheme). To fix the tape, you can put several rivets in a metalmill.

10. Curtain the free ends of the tapes in the buckle, then - in a durable metal ring and again - in buckle. Buckles allow you to adjust the height of the chair above the floor and the angle of its tilt, and the ring collects ribbons into a single suspension. Now the hammock can be suspended and adjust its height.

11. Your hammock challenge is ready.

A source