Plastic Bottle Vases

Plastic bottles will be found in every home, do not hurry to throw them away because it is a wonderful material for crafts. In this article we will look at: how to make vases for flowers from plastic bottles with your own hands.

Painted plastic bottle vase

You will need: Plastic bottles, primer, scissors, tape, paint balonchik.

Master Class

1. Cut the top of the bottle.
2. Purley the edge of the tape.

   

3. Apply a layer of primer on the bottle.
4. Paint a bottle of aerosol paint.
5. Wait for complete drying!

Painted vase from plastic bottle is ready! I recommend to view this video!

Suspended vase in a decoupage technique

You will need: Napkins for decoupage, scissors, brush, glue, adhesive gun, hole punch, plastic bottle, decorative tape with pompoms or ribbon, hanging rope.

Master Class

1. Cut the top of the bottle and work with the bottom.

   

2. Stick the napkin for decoupage to the bottom of the bottle.
3. Put a hole punching two holes for rope at the top opposite each other.

   

4. Tie a rope.
5. Stick the bracket to the upper edge of the vase using the adhesive gun.

The suspended vase from the plastic bottle in the technique of decoupage is ready! I recommend to view this video!

Plastic bottle and thread vase

You will need: Threads for knitting any colors (thick yarn), wide plastic bottle, scissors, fabric strip, thread, needle.

Master Class

1. Cut the top of the bottle and work with the bottom.
2. Relieve the sides of the same number of identical strips, for example 10.

   

3. Tie the tip of yarn to the bottom of any strip.
4. Start weaving in this way: we flip the strips through one - the first front, the second - rear. Bottom gradually rise up, the fatal entire vase.

   

5. Secure the knot from the inside of the vase.
6. Our tissue strip is large stitches on the edge of the vase.

Vase from plastic bottles and thread is ready!

Set of vases of plastic bottles

You will need: 6 identical square plastic bottles, stationery, color scotch.

Master Class

1. Collect the bottles together by putting them next to 3 things in 2 rows.
2. Put on them stationery gum.
3. Gently secure the design of the scotch.
4. Remove the rubber band.

Set of vases from plastic bottles ready! I recommend to view this video!

Suspended Vase for Garden

You will need: Plastic bottle from washing agent, scissors or stationery Knife, hole punch, non-flash marker.

Master Class

1. Cut part of the bottle as shown in the picture.

   

2. Do the hole punching hole in the top of the bottle.
3. Draw a pattern on a vase.

Suspended vase from plastic bottle for garden is ready!

Vase "Cat" from plastic bottle

You will need: Two-liter plastic bottle, stationery knife, black and pink markers, white paint spray.

Master Class

1. Mark the height of the vase by doing the horizontal line around the bottle.
2. Draw two ears over the line.

   

3. Cut the cat along the outlined circuit, gently, slowly cut the ears.
4. Paint a vase from the balonchik.

   

5. Wait for complete drying.
6. Draw with a marker a face of the cat and color the ears.

Vase in the form of a plastic bottle cat is ready! Recommended for watching video master class!

Original plastic bottle vase

You will need: Plastic bottle, scissors, stationery, color napkin.

Master Class

1. Cut the neck of the bottle.
2. Cut on the same strip the top of the bottle.
3. Take off the strips out from the center.

   

4. Bend the band on the half and turn to the side in such a way that the strip crosses the following two stripes and reached the middle of the third.
5. Do this process with each strip.
6. Insert a napkin for color in the vase.

The original vase from the plastic bottle is ready!

Openwork vase from plastic bottle

You will need: Plastic bottle, soldering iron or nail, paint balonchik, marker.

Master Class

1. Cut the neck of the bottle.
2. Draw a pattern with a marker.
3. Heat the soldering iron or nail.
4. Carefully work with a soldering iron, pulling a hole in the drawing.
5. Paint the vase and wait for complete drying.

Openwork vase from plastic bottle ready!

Gourmet plastic bottle vase

You will need: Paul liter plastic bottle, candle, needle, scissors.

Master Class

1. Cut the hole in the bottom of the bottle is equal to the diameter of the lid.
2. Cut the bottom of the bottle.

   

3. Put on the bottom with a hole on the neck of the bottle and tighten the lid.
4. Think out the drawing.
5. Light a candle, bring the needle for 10 seconds and pour holes in the plastic in the upper part. The needle must enter like oil.

   

6. For one flower, you need to pierce 5 holes of 5 petals. Petals cut off with scissors.
7. Make 6 florals in this way.
8. Make a vertical strip from holes from the middle of the vase, slightly reaching the neck.

   

9. Make 15-20 strips from holes in the same way.
10. Reduce the lower part of the vase, making the eights and holes.

An exquisite vase from plastic bottle is ready! I recommend to view this video!

I recommend for viewing a photo gallery of ideas for creating creative vases from plastic bottles!

Make a vase from a plastic bottle is simple enough. Choose the best idea and follow the step-by-step master classes. Try to create with your own hands and will undoubtedly work out!