Holders of shower cabins can add some romantics using the highlighting of the upper shower water jets (tropical shower)
My shower cabin is equipped with an exhaust fan (grid in the upper right corner of photograph). Under the same protective grid on the left is the radio speaker. The fan turned off (because it is never used - there is no need) and put the second speaker in its place. I wondered how to occupy an unused button of the ventilator.
The lamp (Soviet times) came across the eyes, fluffy such from glass LEDs, or if you want - fiber-cutting light, which (light) is lit inside the lamp, and around the light bulb rotates a wheel with multi-colored glasses and changes colors, it inspired it.
1. Turn off the supply hose to the top soul and unscrew the fastening of the "sunflower" of the tropical shower.
2. In hand get this part of the shower cabin:
(Wires, as you will not be in the photo, accidentally hit the frame)
3. You need to purchase in advance:
1) sealant, I generally used silicone polymer glue;
2) LEDs of the 3-volt diameter of 10 mm (I used blue light) in any quantity, I have 12 pieces, i. 3 chains of four light bulbs, because System for power 12 volts (4 light bulbs 3 volts = 12 volts ).;
3) The wire for connecting the bulbs among themselves - 2 meters was enough and left.
4. We disassemble (if you are collapsible, you can not disassemble), drills at the top of the sunflower holes with a drill of the same diameter as a light bulb. We put the bulbs in such a way that they shine inside the sunflower, "legs" up. Fix sealant.
5. Disassembled to stick to the inner part of the foil on the adhesive basis, to give the effect of the mirror, increase the reflective ability of the internal surfaces. It's not obligatory.
6. Women's legs, better thanking. Now it remains to consistently solder the bulbs among themselves, so that it turned out several chains of 4 lamp, because We have 3 volt lamps, and 12 volts nutrition. It is important to comply with the polarity of connection. On these lamps, it is impossible to submit plus for minus and vice versa, unlike conventional incandescent lamps. All this art is conscientiously covered with a good scotch layer in order to reduce the probability of wetting contacts.
Red - Plus
Blue - minus
Yellow - I chain
Green - II chain
Orange - III chain
7. We collect "Sunflower" pre-connecting the wires with each other by observing polarity and two-tier wire for elongation.
8. We put the sunflower not a place. To remove the wire to top in the roof of the cabin, you will need to drill the hole. Do it in the deepening where "sizes" "sunflower" so that the wires are not visible from the cabin. Connect the end of the wire to the fan wire (the fan I cut off in such a way as to keep the dad-mom chips and connect to them.)
9. As a result, we obtain water jets highlighting blue light at the base. The length of the high-speed jet depends on the water pressure. Photo No. 1 clearly shows that the jet is broken into separate drops and the light is not carried out further. I will try to shoot on the video, the photo does not give that effect, believe me on the word in reality it is much brighter and more beautiful, do not be lazy and instead of 12 take 20-24 LEDs. I plan to add one later.
The foot frame is not very beautiful and dark, but still ...
My name is Roman (Krasnodar)!
I love to exercise my insane ideas, often useless and except me uncomfortable, and doubly love when it all turns out !!!
Author - Arakras.
A source