Detailed plan and list of materials for the manufacture of a wooden country table with seats. Length of the table and seats 2m. The table can sit eight people.
Front view:
Side view:
Details dimensions:
Materials used:
Boards, total length 42 meters, cross section 100 mm x 50 mm.
Bolts - 16 galvanized bolts, 10mm thick, 110 mm long. Also 16 nuts and 16 washers to bolts.
Nails - galvanized nails with flat head, long 90mm.
Assembly:
1. First assemble the two side feet of the table with supports on the bolts. Then attach the central board of the tabletop
2. Sweep the extreme boards of the tabletop, checking the same side sinks and the flatness of the table.
3. Sweep the extreme seating boards
4. Unlock the rest of the countertop boards with equal intervals using, for example, wedges. The board to each support is nailed with two nails. Nails are better to score not on one line, but a small zigzag to avoid timber cracking
5. Turn the table upside down. Come to the seats and countertops from the bottom side of the center amplifiers [E] and [F].
Then reconnect the strut [G]. A little move the struts from each other if you are planning to make a hole under the umbrella in the center of the tabletop.
Picnic table ready!
A source