For cooking on the street in Kazan, you can make a portable stove of old wheels. It is much easier than making brickwork, and besides that, such a stove can be hidden by the unrequisite or take with you on a picnic.
Materials:
- Stamped wheels - 2 pcs;
- Door loops -2 pcs.;
- heat-resistant paint;
- Stud M8;
- Pipes any.
The process of manufacturing the stove
Disks are cleaned from dirt and peeled rust. One of them cut the hole for the installation of an existing cauldron.
They are then welded together so that the front side with the holes are out.
From the side of the welded disks is cut out the door to load firewood. You must first cut them through the height and install the door loops.
Then it is necessary to make a wedged neckline on the seam between the outer sides, since this protrusion will interfere with the doors to open. After that, the doors are cut out completely.
As a handle, you can boil on the door with a pin and screw the wooden blank on it.
From the bottom to the stove are welded legs. For the presentability, it can be painted with heat-resistant aerosol paint.